74HC148 8-to-3 Line Priority Encoder IC DIP-16

SKU IN000356

74HC148 8-to-3 Line Priority Encoder IC The 74HC148 converts eight active-low request inputs into a three-bit active-low code.

₹43.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

74HC148 8-to-3 Line Priority Encoder IC The 74HC148 converts eight active-low request inputs into a three-bit active-low code. If several requests are LOW at once, the highest-numbered active input takes priority. Its 16-pin through-hole DIP package suits compatible sockets, breadboards and digital logic PCBs. How priority encoding works Pull EI LOW to enable the encoder. Input I7 has the highest priority and I0 has the lowest. With I7 LOW, A2 A1 A0 is 000, even if lower-priority inputs are also LOW. The code is active LOW, so it is not a normal positive-logic binary count. The GS and EO flags distinguish valid requests and support cascaded encoder circuits. Features

Eight request inputs and three encoded output bits.

Highest-numbered active input takes priority.

Active-low data inputs and encoded outputs.

Enable input EI, group-select flag GS and enable output EO.

HC CMOS logic family in DIP-16 through-hole format.

Specifications

Part family 74HC148

Function 8-to-3 line priority encoder

Package DIP-16

HC-family supply range 2V to 6V; confirm the supplied manufacturer's datasheet

Supply pins VCC pin 16; GND pin 8

Enable input EI pin 5, active LOW

Encoded outputs A2 pin 6; A1 pin 7; A0 pin 9

Status outputs GS pin 14; EO pin 15

Input pin reference I0: pin 10; I1: pin 11; I2: pin 12; I3: pin 13; I4: pin 1; I5: pin 2; I6: pin 3; I7: pin 4. Read the status flags With EI LOW and all request inputs HIGH, the encoded outputs are 111, GS is HIGH and EO is LOW. With a valid LOW request, GS is LOW and EO is HIGH. With EI HIGH, all encoded outputs and both flags are HIGH. Code 111 alone cannot distinguish input I0 from no request; use the flags. Applications and handling Useful for request selection, keyboard-encoding experiments, interrupt-priority demonstrations and digital logic training. Use HC-compatible logic levels and verify timing and loading in the actual manufacturer's datasheet. Tie unused request inputs HIGH instead of leaving them floating. Add a 0.1uF bypass capacitor near VCC and GND. Check notch orientation and pin numbering before applying power. Outputs can pass through intermediate states during input changes; allow settling time before sampling. Package includes 1 x 74HC148 DIP-16 IC. Manufacturer and batch markings may vary. The first gallery image is a generic DIP-16 package illustration, not a photograph of supplied stock. The remaining images are original technical references based on the TI SN74HC148 datasheet. TI SN74HC148 reference datasheet

Eight request inputs and three encoded output bits.

Highest-numbered active input takes priority.

Active-low data inputs and encoded outputs.

Enable input EI, group-select flag GS and enable output EO.

HC CMOS logic family in DIP-16 through-hole format.

Specifications

Part family
74HC148
Function
8-to-3 line priority encoder
Package
DIP-16
HC-family supply range
2V to 6V; confirm the supplied manufacturer's datasheet
Supply pins
VCC pin 16; GND pin 8
Enable input
EI pin 5, active LOW
Encoded outputs
A2 pin 6; A1 pin 7; A0 pin 9
Status outputs
GS pin 14; EO pin 15

More in ICs & Prototyping

You might also need