10 x 15 cm FR4 Copper Clad Plate Laminate Single Side PCB - RS2610
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
SKU IN000355
The 74HC126 contains four independent non-inverting digital buffers in a 14-pin through-hole DIP package. Each channel has its own active-high output-enable input, making the IC
₹43.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
74HC126 Quad 3-State Buffer IC The 74HC126 contains four independent non-inverting digital buffers in a 14-pin through-hole DIP package. Each channel has its own active-high output-enable input, making the IC useful for controlling when a signal reaches a shared digital connection. How it works When a channel's OE input is HIGH, its output Y follows input A. When OE is LOW, Y enters a high-impedance state. High impedance is an electrically released output, not a logic LOW. The 74HC126 uses active-high enables; do not confuse it with the active-low-enable 74HC125. Features
Four separately controlled, non-inverting buffer channels.
3-state outputs for digital signal gating and bus interfaces.
HC CMOS logic family.
DIP-14 through-hole format for compatible breadboards, sockets and PCBs.
Specifications
Part family 74HC126
Function Quad non-inverting buffer with 3-state outputs
Channels 4
Output enable Active HIGH, separate for each channel
Package DIP-14, through-hole
HC-family supply range 2V to 6V; confirm the supplied manufacturer's datasheet
Supply pins VCC: pin 14; GND: pin 7
Channel pin reference
Channel OE A Y
1 1 2 3
2 4 5 6
3 10 9 8
4 13 12 11
Use and handling Check notch orientation and pin numbering before powering the circuit. Use a 0.1uF bypass capacitor close to the supply pins. Tie unused inputs to a defined logic level and leave unused outputs unconnected. Match signal voltages, loading and timing to the actual part's datasheet. This is a logic IC, not a motor driver or general-purpose power buffer. Package includes 1 x 74HC126 DIP-14 IC. The photo shows a representative marked 74HC126 package; manufacturer and batch markings may vary. The other gallery images are original illustrative references based on the TI SN74HC126 datasheet and are not photographs of supplied stock. TI SN74HC126 reference datasheet
Four separately controlled, non-inverting buffer channels.
3-state outputs for digital signal gating and bus interfaces.
HC CMOS logic family.
DIP-14 through-hole format for compatible breadboards, sockets and PCBs.
| Part family | |
| 74HC126 | |
| Function | |
| Quad non-inverting buffer with 3-state outputs | |
| Channels | |
| 4 | |
| Output enable | |
| Active HIGH, separate for each channel | |
| Package | |
| DIP-14, through-hole | |
| HC-family supply range | |
| 2V to 6V; confirm the supplied manufacturer's datasheet | |
| Supply pins | |
| VCC | pin 14; GND: pin 7 |
More in ICs & Prototyping
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.
₹120.00 GST added at checkout
The universal PCB board is easy to weld diode, resistor, transistor, capacitor, etc. With referencing letters and numbers printed on the Single side for easy reference of
₹31.50 GST added at checkout
This is a 12" x 12" (30 cm x 30 cm) copper-clad PCB. This copper clad is perfect for hobbyists & electronics engineers who have tried successfully making their own single-sided
₹247.50 GST added at checkout
The 12x18cm Double Sided PCB Board Tinned Through Holes Universal Printed Circuit Proto Board. This means the PCB has copper traces (conductors) on both sides of the board.
₹171.00 GST added at checkout