About this product
Part Number: G3MB-202P
Voltage: 5V
Working Current: 12.5 mA
Trigger Voltage: 3.3~5V
Description:
This 5V 4 Channel SSR Solid State Relay Module 240V 2A Output with Resistive Fuse is based on the G3MB SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed). A solid-state relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay. When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
Specification:
Part Number
G3MB-202P
Voltage
5V
Working Current
12.5 mA
Trigger Voltage
3.3 to 5V
Trigger Current
2 mA
Max. Load
2A @240V AC
Features:
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by a Microcontroller
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Input Section:
DC +: positive power supply (by relay voltage power supply)
DC-: connect power negative
CH1: 1 relay module signal to trigger the end (high-level trigger effective)
CH2: 2-channel relay module signal to trigger the end (high-level trigger effective)
CH3: 3 relay module signal to trigger the end (high-level trigger effective)
CH4: 4-channel relay module signal to trigger the end (high-level trigger effective)
Voltage version
static current
working current
trigger voltage
trigger current
1 road 5v
0mA
13.8mA
3.3-5V
2mA
2 road 5v
0mA
26.8mA
3.3-5V
2mA
3 road 5v
0mA
37mA
3.3-5V
2mA
4 road 5v
0mA
48mA
3.3-5V
2mA
Package Included:
1 x 5V 4-Channel Solid State Relay Board, Solid State Relay Modul, High and Low-Level Trigger
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by a Microcontroller
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON