About this product
Input Voltage: DC 12V-30V
Output: HVDC, About 800 times of input voltage
Power Requirements: Less than 12V ≥ 5A, above 15V ≥ 15A
Operating Frequency: 30kHz-50kHz adaptive
Description:
This is a ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board. Using military FR4-A material 1.6mm double-board circuit board, power line extra add tin and optimizes line width of MOS tube drive circuit. Using two IRFP250N power field pipe, large current, small internal resistance, super-power. Using 1.25 copper wire large inductance, more stable performance.
Specification:
Input Voltage: DC 12V-30V
Output: HVDC, About 800 times of input voltage
Power Requirements: Less than 12V ≥ 5A, above 15V ≥ 15A
Operating Frequency: 30kHz-50kHz adaptive
Secondary Parameters: 5T + 5T
Output Voltage / Power:
Input 12V / 5A, the output of about 10000V / 60W
Input 24V / 10A, the output of about 20000V / 200W
Arc Length: 1-5cm
Power Range: 180-360W
Features:
Using two IRFP250N power field pipe, large current, small internal resistance, super-power!
Using 1.25 copper wire large inductance, more stable performance.
Using 1% precision metal film resistors!
Use 25 * 24 * 16mm thick anti-static cooling!
Using MKP 0.33UF 1200V two parallel resonant capacitor for high frequency.
Precautions:
After finish the installation, carefully check it and verify that all components soldered correctly
Please note that the positive and negative signs of input power, carefully check to prevent reverse burning plate
The test voltage is recommended for the low power 12v, prevent mis-wiring problems or cause burning plate
Drive board limit input is DC 30v, current 10A, not recommended using limits, do not long working under overvoltage and overcurrent conditions. Driver board is not suitable for induction heating, if you need induction heating, it is recommended input voltage 15v or less. For induction heating or long use high-power must need to add the cooling fan, if poor heat dissipation, it will result in MOS tube temperature is too high, will accelerate the aging of MOS tube even burn and other issues.
Package Included:
1 x ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board
Using two IRFP250N power field pipe, large current, small internal resistance, super-power!
Using 1.25 copper wire large inductance, more stable performance.
Using 1% precision metal film resistors!
Use 25 * 24 * 16mm thick anti-static cooling!
Using MKP 0.33UF 1200V two parallel resonant capacitor for high frequency.