XH-M229 ATX Power Supply Breakout Board 24-Pin - 3.3V 5V 12V and -12V Bench Adapter - RS1824

SKU RS1824

RS1824 brings the fixed low-voltage rails of a compatible desktop ATX power supply to accessible binding posts.

₹238.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

XH-M229 ATX power supply breakout board RS1824 brings the fixed low-voltage rails of a compatible desktop ATX power supply to accessible binding posts. Use it for electronics prototypes, circuit checks and small bench projects. The board is an adapter, not a standalone power supply: an external compatible ATX PSU is required. Outputs and controls

24-pin main ATX input socket.

Labelled -12V, +12V, +5V and +3.3V outputs, each paired with GND.

Four replaceable glass output fuses.

Onboard enable switch, indicator LED and mounting holes.

Read the printed voltage labels rather than relying on terminal colour. The red post labelled -12V is negative relative to GND. All GND posts share the supply return; these are not four isolated power supplies. The board does not provide adjustable voltage or adjustable current limiting. Check compatibility before connecting Use the PSU's standard motherboard ATX cable, not a CPU/EPS or PCIe power cable. Modular PSU-side pinouts are not universal: use only the cable specified for that PSU. Do not assume a proprietary OEM connector or an ATX12VO-only supply matches this board. The board switch requests PSU output through the ATX enable signal; it is not a mains-isolation switch. Disconnect the PSU from AC before plugging, unplugging, changing fuses or rewiring. Standby power can remain present at an ATX connector while the main outputs are disabled. Current and fuse limits Read the PSU label for each rail's current and combined-power limits. The -12V rail can have a much lower rating than the positive rails. Installed fuse ratings do not establish usable continuous current. Stay within the lowest applicable PSU, fuse, board, connector and wire limit. Do not bypass a fuse or fit a higher rating to stop it blowing. First-use checklist Mount the board securely on insulated standoffs with the underside clear of metal. With no circuit connected, enable the supply and measure the chosen rail against GND. The LED alone does not prove every fused output is present. Some older PSUs need a minimum load; check their documentation instead of assuming a failed adapter. Power down before connecting the load. Protect exposed terminals against accidental shorts. Never connect mains directly to this board, open the PSU, parallel output rails or connect another source to an output. Package 1 x XH-M229 breakout board. PSU, cables, test leads and mounting hardware are not included.

More in Power Supplies

You might also need