About this product
Description:
The WT588D-U-32M Voice Module is a digital recording and playback device. It can operate as a standalone playback device, or it can be controlled by a microprocessor such as an Arduino.
The DC2.8V-5.5V Mini USB Interface Sound Module exists in several formats; the -U shows that the board has a USB to allow uploading sound files. The memory storage is shown by 32M (32 MB) and there are also 16 MB versions.
Specifications:
Supply Voltage: DC 2.8V 5.5V
Application: Computer
Dissipation Power: WT588D-20SS WT588D 20SS
Features:
Package of 28-pin modules, which can be replaced with memory for gaining different lengths of storage time.
Supports 2M bit ~ 32M bit capacity SPI-Flash (Note: 1 byte = 8 bits)
The WT588D-20SS voice is used as a control core chip.
Embedded human voice processor, feels very natural and sweet.
Good audio quality output for 13-bit/DA converter and 12-bit/PWM processing of audio. Support for loading 6K ~ 22K Hz audio sampling rate.
PWM output can directly promote 0.5W/8 speakers and plenty of current.
Support DAC / PWM output.
Support for loading WAV audio format.
Support key control mode, one-wire serial control mode, and three-wire serial control mode.
A variety of IO trigger ways can be set to button control mode.
The way BUSY signal output can be set randomly.
Loading no more than 500 segments of voice for editing.
The address bit is controlled by 220 segments of voice, but a single address bit can just load up to 128.
Voice player to enter the sleep mode to stop immediately.
It is a simple interface and convenient because of using the WT588D Voice Chip that benefits from exerting its functions.
A lot of operations can be finished in software. Such as setting up control mode, inserting voice, composing voice, calling voice, etc.
Support online USB download / offline USB download? Moreover, it also can download data to SPI-Flash even if WT588D-U is working.
Dormant current less than 10uA
Powerful anti-jamming. Widely used in the industrial field.
Package Included:
1 x WT588D-U-32M Voice Module DC2.8V-5.5V Mini USB Interface Sound Module
Package of 28-pin modules, which can be replaced with memory for gaining different lengths of storage time.
Supports 2M bit ~ 32M bit capacity SPI-Flash (Note: 1 byte = 8 bits)
The WT588D-20SS voice is used as a control core chip.
Embedded human voice processor, feels very natural and sweet.
Good audio quality output for 13-bit/DA converter and 12-bit/PWM processing of audio. Support for loading 6K ~ 22K Hz audio sampling rate.
PWM output can directly promote 0.5W/8 speakers and plenty of current.
Support DAC / PWM output.
Support for loading WAV audio format.
Support key control mode, one-wire serial control mode, and three-wire serial control mode.
A variety of IO trigger ways can be set to button control mode.
The way BUSY signal output can be set randomly.
Loading no more than 500 segments of voice for editing.
The address bit is controlled by 220 segments of voice, but a single address bit can just load up to 128.
Voice player to enter the sleep mode to stop immediately.
It is a simple interface and convenient because of using the WT588D Voice Chip that benefits from exerting its functions.
A lot of operations can be finished in software. Such as setting up control mode, inserting voice, composing voice, calling voice, etc.
Support online USB download / offline USB download? Moreover, it also can download data to SPI-Flash even if WT588D-U is working.
Dormant current less than 10uA
Powerful anti-jamming. Widely used in the industrial field.