About this product
Description:
USB to CAN Adapter Model Collects data from CAN bus to PC via USB for transceiver control, data analysis, acquisition, and monitoring of CAN bus networks. Adopts the original STM32F103 chip, stable and reliable communication
It Supports 4 working modes: normal mode, loopback mode, silent mode, and silent loopback mode. Supports multiple CAN data sending modes: single frame, multiple frames, manual, regular, and cyclic sending. Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID or specify an ID to automatically answer the configured data.
CAN Baud Rate Is Configurable In The Range Of 5Kbps-1Mbps. Supports Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, and supports secondary development.
Features:
Supports CAN2.0A (standard frame) and CAN2.0B (extended frame)
CAN baud rate is configurable in the range of 5Kbps-1Mbps
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
Supports multiple CAN data sending modes: single frame, multiple frames, manual, regular, and cyclic sending
Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID or specify an ID to automatically answer the configured data
Data can be saved as TXT or Excel
Supports CAN bus detection for status checking
Sending/receiving CAN data with a time scale allows sequential displaying
The baud rate of the USB virtual COM port is configurable in the range of 9600 ~ 2000000 bps (2000000 bps by default)
Supports setting working parameters by configuration software or serial command; can be saved after power off
Adopts STM32 chip solution, stable and reliable communication
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit
Comes with master computer software for the Windows system, easy to use
Easy secondary development; just need to modify the sending and receiving commands
Pin Description:
TX: Blinks when CAN is sending data
PWR: Power indicator, Lights up red when the USB port is connected
RX: Blinks when receiving the data
Reset Button: press before power on then release after power on to restore factory settings
120Ω resistor Switch: Switch to the CAN terminal side to enable the 120Ω resistor, switch to the other side to disable
Useful Link:
Waveshare USB To CAN Adapter Model A
Package Included:
1 x Waveshare USB To CAN Adapter Model A
1 x USB Cable (~1.5 m)
1 x Screwdriver
Supports CAN2.0A (standard frame) and CAN2.0B (extended frame)
CAN baud rate is configurable in the range of 5Kbps-1Mbps
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
Supports multiple CAN data sending modes: single frame, multiple frames, manual, regular, and cyclic sending
Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID or specify an ID to automatically answer the configured data
Data can be saved as TXT or Excel
Supports CAN bus detection for status checking
Sending/receiving CAN data with a time scale allows sequential displaying
The baud rate of the USB virtual COM port is configurable in the range of 9600 ~ 2000000 bps (2000000 bps by default)
Supports setting working parameters by configuration software or serial command; can be saved after power off
Adopts STM32 chip solution, stable and reliable communication
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit
Comes with master computer software for the Windows system, easy to use
Easy secondary development; just need to modify the sending and receiving commands