About this product
Description:
The Waveshare Solar Power Management Module, designed for 6V to 24V solar panels. It efficiently charges 3.7V Li batteries (solar or USB) and provides a clean 5V/1A regulated output. Featuring MPPT for maximum power conversion and multi-protection circuits, this module ensures high-efficiency, stable, and safe performance. Perfect for solar-powered setups, low-power IoT, and eco-friendly projects.
Specifications:
USB Input voltage: 5V
Charging Cut-off Voltage: 4.2V±1%V
OverDischarge Protect: 2.9V±1%V
Maximum Efficiency: ~78% Solar panel charge
USB: Charge efficiency ~82%
Quiescent Current: <2mA
Operating Temperature: -40℃~85℃
Features:
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Supports solar panel / USB connection battery charging
For 6V~24V solar panel, DC-002 jack input or screw terminal input
Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency
Onboard two power output interfaces: USB port for 5V output, pinheader for 3.3V or 5V output
Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V rechargeable Li batteries.
Several LED indicators, for monitoring the status of solar panel and battery
Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to use
Product Interface:
Solar panel charging input: Charged by solar panel, DC-002 jack or screw terminal
USB charging input: Charged by USB connection, connect a 5V power adapter through the Micro USB port
Power output:
USB port: 5V/1A output
pinheader: 5V/1A or 3.3V/1A
Battery interfaces: for connecting 3.7V rechargeable Li battery, PH2.0 connector or 14500 battery holder
CS8501: USB power management chip, for USB charging and 5V/1A boost output
CN3791: Solar power management chip, for solar panel charging and buck input
Li battery protection chip: Li battery over charge / over discharge protection
Battery switch
MPPTSET switch (bottom side):
supported level: 6V/9V/12V/18V/24V
select the level closed to input level to improve charging efficiency
BOOT key
Battery capacity indicators
USB charging indicators:
USB Charge: on when USB charging
USB Done: on when the battery is full charged by USB
Solar panel charging indicators:
Solar Charge: on when solar panel charging
Solar Done: on when the battery is full charged by solar panel
Solar Warning: on when solar panel reverse connection
Battery warning: on when battery reverse connection
Power output indicator: 5V/1A output
Safety Cautions:
Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage if they're not properly recharged or used.
Do not reverse the polarities when recharging or discharging the battery. Do not use an inferior charger/charging panel to recharge the battery.
Do not mix old batteries with new ones, and avoid using batteries of different brands.
When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reach their max cycle life, or after working for over two years, whichever comes first.
Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Useful Link:
Waveshare Solar Power Management Module
Package Included:
1 x Waveshare Solar Power Management Module
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Supports solar panel / USB connection battery charging
For 6V~24V solar panel, DC-002 jack input or screw terminal input
Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency
Onboard two power output interfaces: USB port for 5V output, pinheader for 3.3V or 5V output
Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V rechargeable Li batteries.
Several LED indicators, for monitoring the status of solar panel and battery
Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to use