About this product
Description:
The SIM7600G-H 4G HAT is a high-performance LTE CAT4 module supporting 150Mbps downlink speeds. It offers low-power consumption and integrates GNSS positioning capabilities.
The SIM7600G-H HAT is a versatile 4G module that can connect your devices to the internet, allowing you to surf the web, make calls, send texts, and track your location.
Specifications:
Frequency Band
LTE Cat-4
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66
LTE-TDD: B34/B38/B39/B40/B41
3G
UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19
2G
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
GNSS
Satellite systems
GPS/Beidou/GLONASS/GALILEO/QZSS
Receiver type
16-channel
C/A Code
Sensitivity
-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)
Cold starts: -148 dBm
Time-To-First-Fix (open air)
Cold starts: <35s
Hot starts: <1s
SMS and Audio
SMS
Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature
Supports echo cancellation
Supports noise reduction
Other
Power supply
5V
Operating voltage
5V / 3.3V (configured via jumper)
Operating temperature
-30°C ~ 80°C
Storage temperature
-45°C ~ 90°C
Dimensions
56.21mm × 65.15mm
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone calls
2x LED indicators, easy to monitor the operating status
Onboard voltage translator: the operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baud rate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Useful Link:
SIM7600G-H_4G_HAT
Package Included:
1 x Waveshare SIM7600G-H 4G HAT LTE Cat-4 4G/3G/2G HAT for Raspberry Pi 4G HAT for Raspberry Pi 4G Module for RPi, GNSS Positioning, Global Band
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone calls
2x LED indicators, easy to monitor the operating status
Onboard voltage translator: the operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baud rate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)