About this product
Description:
SIM7070G is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, SIM7070G is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Specifications:
NB-IOT/CAT-M/2G
Band
NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
GSM/GPRS/EDGE: 850/900/1800/1900MHz
Data rate
NB-IoT: 136Kbps(DL)/150Kbps(UL)
Cat-M: 589Kbps(DL)/1119Kbps(UL)
GPRS: 85.6Kbps(DL)/85.6Kbps(UL)
EDGE: 236.8Kbps(DL)/236.8Kbps(UL)
SIM card support
NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
Applicable region
global
GNSS
Satellite systems
GPS, BeiDou, GLONASS, Galileo
Receiver type
16-channel
C/A Code
Band
GPS L1: 1575.42 ± 1.023MHz
GLONASS L1: 1598.0625 ~ 1605.375MHz
BDS B1: 1559.052 ~ 1591.788MHz
Galileo L1: 1575.42 ± 1.023MHz
Data format
NMEA-0183
Antenna
Active antenna
Other
Power supply
5V
Operating voltage
5V / 3.3V (configured via 0Ω resistor)
Current consumption
about 41mA (idle mode)
Operating temperature
-40°C ~ 85°C
Storage temperature
-45°C ~ 90°C
Dimensions
30.50mm × 65.00mm
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
2x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Package Included:
1 x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, Global Band Support
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
SIM7070G supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
SIM7070G supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available)
2x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps
SIM7070G comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)