About this product
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
Supports GNSS positioning (GPS, BeiDou, GLONASS)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
SIM card slot, compatible with both normal SIM card and NB-IoT specific card
Description :
This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
Supports GNSS positioning (GPS, BeiDou, GLONASS)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
SIM card slot, compatible with both normal SIM card and NB-IoT specific card
2x LED indicators, easy to monitor the working status
Baudrate: 300bps~3686400bps (115200bps by default)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
NB-IOT / CAT-M / 2G
Frequency bands
NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28
Cat-M: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B39
GPRS/EDGE: 850, 900, 1800, 1900MHz
Data rate
NB-IoT: 34(DL)/66(UL)
Cat-M: 300(DL)/375(UL)
EDGE: 236.8(DL)/236.8(UL)
GPRS: 85.6(DL)/85.6(UL)
SIM card support
NB-IoT: NB Specific (Not Included)
Cat-M/GPRS/EDGE: Normal SIM (Not Included)
Applicable region
Global
GNSS
Satellite systems
GPS, BeiDou, GLONASS
Receiver type
16-channel
C/A Code
Sensitivity
Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix
Cold starts: <35s
Hot starts: <1s
Accuracy
Position: <2.5m CEP
OTHER
Power supply
5V
Operating voltage
5V / 3.3V (3.3V by default)
Sleep Mode current
1.2mA (@DRX=2.56s)
Power Save Mode current
9uA
Operating temperature
-40°C ~ 85°C
Storage temperature
-45°C ~ 90°C
Dimensions
30.2mm x 65mm
Package Included :
1 X SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
Supports GNSS positioning (GPS, BeiDou, GLONASS)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
SIM card slot, compatible with both normal SIM card and NB-IoT specific card
2x LED indicators, easy to monitor the working status
Baudrate: 300bps~3686400bps (115200bps by default)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)