About this product
Description:
The RS232 TO RS485 (D) is an industrial-grade DIN-rail active opto-isolated RS232 to RS485 converter.
Specification:
RS232 TO RS485 (B)
without an LED indicator
RS232 TO RS485 (D)
With LED indicators
Product Type
Active electromagnetic isolated RS232 TO RS485 asynchronous bi-directional converter
Power supply interface
6~36V DC
5V~36V DC
With anti-reverse protection
Baudrate
300 ~ 115200bps
Device Port
RS232/RS485 standard compatible
RS232 port
Connector
screw terminal
Protection
signal filtering, anti-interference, ESD protection
Transmission distance
about 15m
Transmission mode
point-to-point
RS485 port
Connector
screw terminal
Direction control
Hardware automatic control
Protection
600W lightningproof and surge-suppress, 15KV ESD protection
Terminal resistor
120R, switchable
Transmission Distance
about 1.2km
Transmission Mode
point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
Indicators
PWR
-
The Red power indicator lights up when there is a power supply connection and voltage is detected
TXD
-
The green TX indicator lights up when the RS232 port sends data
RXD
-
Blue RX indicator lights up when the device port sends data back
Appearance
Case
Rail-mount ABS case
Dimensions
91.6 × 23.3 × 58.7mm
Application Examples:
Features:
Compatible with RS232/RS485, converts RS232 signal to balanced and differential RS485 signal.
Stable transmission rate with a stable speed of 300~115200bps
Onboard unibody power isolation provides stable isolation voltage, and there is no external power supply for the isolated terminal.
Onboard unibody digital isolation provides signal isolation with high reliability, strong anti-interference, and low power consumption.
Onboard TVS (Transient Voltage Suppressor) effectively resists the surge voltage and transient peak voltage in the circuit and provides lightningproof and ESD protection.
Onboard self-recovery fuse and protection diodes ensure stable output of current and voltage, overcurrent and overvoltage protection, and improve anti-shock capability.
Onboard RS485 output terminal 120R, switch via jumper caps.
Onboard power supply screw terminal, supports 5V~36V DC wide-voltage range power input.
Industrial-grade ABS eco-friendly case, compact size, easy to install, and cost-effective.
Product Interface:
Top side screw terminal
Bottom side screw terminal
VCC
Power Input
DC 5~36V power supply
120R
120R enable pin header
GND
Ground / RS232 signal ground
SGND
RS485 signal ground
TXD
RS232 transmit data pin
A+
RS485 differential signal A+
RXD
RS232 receive data pin
B-
RS485 differential signal B-
Useful Link:
Waveshare Industrial RS232 to RS485 Converter (D)
Package Includes:
1 x RS232 TO RS485 (D)
1 x Screwdriver
Compatible with RS232/RS485, converts RS232 signal to balanced and differential RS485 signal.
Stable transmission rate with a stable speed of 300~115200bps
Onboard unibody power isolation provides stable isolation voltage, and there is no external power supply for the isolated terminal.
Onboard unibody digital isolation provides signal isolation with high reliability, strong anti-interference, and low power consumption.
Onboard TVS (Transient Voltage Suppressor) effectively resists the surge voltage and transient peak voltage in the circuit and provides lightningproof and ESD protection.
Onboard self-recovery fuse and protection diodes ensure stable output of current and voltage, overcurrent and overvoltage protection, and improve anti-shock capability.
Onboard RS485 output terminal 120R, switch via jumper caps.
Onboard power supply screw terminal, supports 5V~36V DC wide-voltage range power input.
Industrial-grade ABS eco-friendly case, compact size, easy to install, and cost-effective.