About this product
Description:
RS232 TO RS485 (B) is an active electromagnetic isolated RS232 TO RS485 asynchronous bi-directional converter.
Specification:
Model Type: Converter
Power Supply: 6~36V DC
Baud Rate: 300~115200bps
Device Port: RS232/RS485 standard compatible
Application Examples:
Features:
Compatible with RS232/RS485 standard, converting the RS232 signal into balanced differential RS485 signal
Stable transmission at the rate of 300~115200bps
Onboard unibody power supply isolation provides a stable isolated voltage and needs no extra power supply for the isolated terminal
Onboard unibody digital isolation allows signal isolation, high reliability, strong anti-interference, and low power consumption
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof, and anti-electrostatic
Onboard resettable fuse and protection diodes ensure the current/voltage stable outputs, provide over-current/over-voltage protection, and improve shock resistance
Integrates an optional RS485 output terminal, 120R resistor, enabled/disabled via a switch
The onboard power supply screw terminal allows 6V~36V DC wide-range input
Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective
Product Interface:
Top side screw terminal
Bottom side screw terminal
VCC
Power Input
DC 6~36V power supply
120R
120R resistor switch
GND
Ground / RS232 signal ground
SGND
RS485 signal ground
TXD
RS232 transmit data pin
A+
RS485 differential signal A+
RXD
RS232 receive data pin
B-
RS485 differential signal B-
RS232:
Connector: screw terminal
Transmission distance: about 15m
Transmission mode: point-to-point
RS485:
Connector screw: terminal
Direction control, Hardware automatic control
Protection 600W: lightning proof and surge-suppress, 15KV ESD protection
Terminal resistor: 120R, enabled/disabled via a switch
Transmission Distance: About 1.2km
Transmission Mode: point-to-multipoint (up to 32 nodes; it is recommended to use repeaters for 16 nodes or more)
Appearance:
Case: Rail-mount ABS case
Dimensions: 91.6 × 23.3 × 58.7mm
Useful Link:
Waveshare RS232 to RS485 (B) Converter
Package Included:
1 x RS232 TO RS485 (B)
1 x Screwdriver
Compatible with RS232/RS485 standard, converting the RS232 signal into balanced differential RS485 signal
Stable transmission at the rate of 300~115200bps
Onboard unibody power supply isolation provides a stable isolated voltage and needs no extra power supply for the isolated terminal
Onboard unibody digital isolation allows signal isolation, high reliability, strong anti-interference, and low power consumption
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof, and anti-electrostatic
Onboard resettable fuse and protection diodes ensure the current/voltage stable outputs, provide over-current/over-voltage protection, and improve shock resistance
Integrates an optional RS485 output terminal, 120R resistor, enabled/disabled via a switch
The onboard power supply screw terminal allows 6V~36V DC wide-range input
Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective