About this product
Description:
The Waveshare RS232/RS485/RS422 to CAN Bus Industrial Isolated Converter is a reliable industrial communication gateway designed to seamlessly connect RS232, RS485, RS422, and CAN Bus networks. With support for Modbus RTU protocol conversion, it enables efficient data exchange between legacy serial devices and modern CAN-based systems, making it ideal for industrial automation, PLC communication, smart manufacturing, energy management, transportation, and IoT applications.
Built for demanding industrial environments, this converter features advanced electrical isolation and multiple protection circuits to ensure stable, secure, and interference-free communication. Integrated surge protection, ESD protection, signal isolation, and anti-interference technology help protect connected equipment from voltage spikes, electromagnetic noise, and harsh operating conditions, ensuring long-term reliability and system stability.
Its compact industrial-grade design allows easy integration into factory automation systems, process control networks, remote monitoring solutions, and industrial communication infrastructures. Whether upgrading existing equipment or deploying new automation projects, the Wave
share RS232/RS485/RS422 to CAN Converter delivers dependable performance, enhanced protection, and seamless protocol conversion for mission-critical applications.
Specification:
Product
Industrial isolated RS232/485/422 TO CAN
Host Interface
CAN
Device Interface
RS232/485/422
CAN Interface
Baud Rate
10kbps~1000kbps
Direction Control
Hardware automatic control
Resistor
Default 120R
Interface
Screw terminal
CAN Interface
H, L, GND
RS232/485/422 Interface
Baud Rate
1200bps ~ 460800bps
Direction Control
Hardware automatic control
Resistor
Onboard reserved 120R matching resistor, NC by default, enabled via jumpers
RS232 Interface
DB9 Interface
RS485/RS-422 Interface
Screw terminal
RS485 Interface
A+, B-, GND
RS422 Interface
TA, TB, RA, RB, GND
Protection
Provides 600W of lightning, surge, and 15KV static protection (on-board 120R balancing resistor)
Transmission Mode
Point-to-multipoints (up to 32 nodes). It is recommended to use repeaters for 16 nodes or more.
Button
Press and hold for 1 second
Reset the system
Press and hold for 5 seconds
Restore Factory Status
Indicator
PWR
The Red power indicator lights up when voltage is detected
RUN
Operation status indicator: normal operation blinks at 1-second intervals
COM
CAN blue TX indicator lights up when the CAN port sends data
RS232/485/422 blue RX indicator, lights up when the RS232/285/422 port receives data
CAN
CAN blue RX indicator lights up when the CAN port receives data
RS232/485/422 blue TX indicator, lights up when the RS232/485/422 port sends data
Environment
Temperature range
-10℃ ~ 70℃
Features:
Adopts SP3232EEN + SP485EEN chips for stable and high-speed communication with better compatibility.
Onboard unibody power supply isolation provides a stable isolated voltage and needs no extra power supply for the isolated terminal.
Onboard unibody digital isolation allows signal isolation, high reliability, strong anti-interference, and low power consumption.
Compliant with CAN 2.0B (extended frame) specification, compatible with CAN 2.0A (standard frame) specification; Compliant with ISO 11898-1/2/3 standard.
CAN baud rate: ~10kbps–1000kbps, configurable CAN baud rate.
High-speed conversion: At a serial port baud rate of 115200 and CAN rate of 250kbps, the CAN sending speed can reach up to 1270 extended frames per second (close to the theoretical maximum of 1309 extended frames per second).
Supports data communication and conversion between RS232/485/422 and CAN interfaces.
Supports 4 operating modes: transparent conversion, transparent with identifiers conversion, format conversion, and Modbus RTU protocol conversion.
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit, is lightningproof & anti-electrostatic.
Onboard self-recovery fuse and protection diodes ensure the current/voltage stable outputs, provide over-current/over-voltage proof, and improve shock resistance.
Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection.
Onboard a 120Ω terminal resistor on the RS485/RS422 port, configurable by jumper.
Supports device firmware upgrade via RS232/485/422, making it more convenient for firmware customisation.
Supports setting operation parameters via configuration software or serial commands, capable of saving settings after powering off.
The onboard power supply screw terminal allows a 5V~36V DC wide-range input.
4 LEDs for indicating the power and transceiver status.
Industrial-grade metal case, supports wall-mount and rail-mount installation, solid and beautiful, easy to install.
Product Interface:
Pin Description:
Multiple Protection, Safe and Stable:
Useful Link:
Waveshare RS232/485/422 to CAN Industrial Isolated Converter
Package Included:
1 x RS232/485/422 TO CAN
1 x Rail-mount buckle
1 x Screwdriver
Adopts SP3232EEN + SP485EEN chips for stable and high-speed communication with better compatibility.
Onboard unibody power supply isolation provides a stable isolated voltage and needs no extra power supply for the isolated terminal.
Onboard unibody digital isolation allows signal isolation, high reliability, strong anti-interference, and low power consumption.
Compliant with CAN 2.0B (extended frame) specification, compatible with CAN 2.0A (standard frame) specification; Compliant with ISO 11898-1/2/3 standard.
CAN baud rate: ~10kbps–1000kbps, configurable CAN baud rate.
High-speed conversion: At a serial port baud rate of 115200 and CAN rate of 250kbps, the CAN sending speed can reach up to 1270 extended frames per second (close to the theoretical maximum of 1309 extended frames per second).
Supports data communication and conversion between RS232/485/422 and CAN interfaces.
Supports 4 operating modes: transparent conversion, transparent with identifiers conversion, format conversion, and Modbus RTU protocol conversion.
Onboard TVS (Transient Voltage Suppressor) effectively suppresses surge voltage and transient spike voltage in the circuit, is lightningproof & anti-electrostatic.
Onboard self-recovery fuse and protection diodes ensure the current/voltage stable outputs, provide over-current/over-voltage proof, and improve shock resistance.
Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection.
Onboard a 120Ω terminal resistor on the RS485/RS422 port, configurable by jumper.
Supports device firmware upgrade via RS232/485/422, making it more convenient for firmware customisation.
Supports setting operation parameters via configuration software or serial commands, capable of saving settings after powering off.
The onboard power supply screw terminal allows a 5V~36V DC wide-range input.
4 LEDs for indicating the power and transceiver status.
Industrial-grade metal case, supports wall-mount and rail-mount installation, solid and beautiful, easy to install.