About this product
Description:
The Waveshare RP2040 Microcontroller Development Board is a compact, high-performance, and cost-effective solution for embedded projects and product development. It comes with a 1.28-inch round capacitive touch LCD, built-in 6-axis motion sensor (3-axis accelerometer + 3-axis gyroscope), and an integrated Li-ion battery charging manager. With its small size and versatile features, this board is ideal for IoT applications, robotics, wearable devices, and interactive projects, making it easy to prototype and integrate into real-world products quickly.
Specification:
Display Size (Inch): 1.28
Chip: Display Chip: GC9A01A, Touch Chip: CST816S
Display Panel: IPS
Touch Port: I2C
Interface: SPI
Pixel Pitch: 0.135(H)x 0.135(V)mm
Sensor: QMI8658C
Resolution: 16 bits (Gyroscope)
Features:
RP2040 microcontroller chip designed by Raspberry Pi
Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
Built-in 264KB of SRAM and 4MB of on-chip Flash
Type-C connector, keeps it up to date, and is easier to use
Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
Onboard Lithium battery recharge/discharge header, suitable for mobile devices
USB 1.1 host and device support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
Accurate clock and timer on-chip
Temperature sensor
On-chip accelerated floating-point library
6 × GPIO pin via SH1.0 connector
Product Interface:
Pin Description:
USB Type-C connector: supports USB 1.1 hosts and slave devices
ETA6096: high-efficiency Lithium battery recharge manager
RT9013-33GB: 500mA low dropout, low noise, ultra-fast LDO
W25Q128JVSIQ: 16MB NOR-Flash
RP2040: dual-core processor, up to 133MHz operating frequency
QMI8658: 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
BOOT button: Press it when resetting to enter download mode
RESET button
MX1.25 battery header: MX1.25 2P connector, for a 3.7V Lithium battery, supports charging and discharging
Useful Link:
Waveshare RP2040 Development Board – 1.28” Round Touch Screen
Package Included:
1 x RP2040-Touch-LCD-1.28
1 x SH1.0 12PIN cable
RP2040 microcontroller chip designed by Raspberry Pi
Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
Built-in 264KB of SRAM and 4MB of on-chip Flash
Type-C connector, keeps it up to date, and is easier to use
Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
Onboard Lithium battery recharge/discharge header, suitable for mobile devices
USB 1.1 host and device support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
Accurate clock and timer on-chip
Temperature sensor
On-chip accelerated floating-point library
6 × GPIO pin via SH1.0 connector