About this product
Standard Raspberry Pi 40-pin GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
Onboard USB interface, to test AT commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports ONLY 1.8V SIM card (3V SIM cards are not available)
3x LED indicators, easy to monitor the working status
Description:
This is a telecommunication HAT that features multi-communication functionalities: NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System).
With the development of LTE telecommunication technology, 2G/3G networks are fading away; the future world would be dominated by IoT technologies consisting of low-bandwidth NB-IoT/Cat-M and high-bandwidth 4G/5G standards.
This HAT supports global bands of NB-IoT and Cat-M, as well as a positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Features:
Standard Raspberry Pi 40-PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
Onboard USB interface, to test AT commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports ONLY 1.8V SIM card (3V SIM cards are not available)
3x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Communications Specifications:
NB-IOT
CAT-M (EMTC)
Band
NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
Emitting power
Class 5 (0.125W@LTE)
Data rate
Uplink ≤ 150 kbps
Downlink ≤ 136 kbps
Uplink ≤ 1119 kbps
Downlink ≤ 589 kbps
Supported SIM Card
NB-IoT / Cat-M card (1.8V SIM card ONLY)
Applicable region
Global
GNSS Specifications:
Receiver type
16-channel
C/A code
Bands Update frequency: 1 Hz (default)
GNSS L1: 1575.42±1.023 MHz
GLONASS: 1597.5~1605.8 MHz
BeiDou: 1559.05~1563.14 MHz
Galileo L1: 1575.42±1.023MHz
Data format: NMEA-0183
Antenna: active antenna
Other Specifications:
Power supply voltage: 5V
Logic level: 5V / 3.3V (configured via jumper)
Overall current (idle mode): 39mA
Module sole current (VBAT=3.8V): Operating temperature: -40°C ~ 85°C
Idle mode: 10mA
Sleep mode: 1.2 mA
PSM mode: 3.2uA
eDRX mode: 0.59 mA (eDRX = 81.92 s)
Storage temperature: -45°C ~ 90°C
Dimension: 30.2mm x 65mm
Package Included:
1 X NB-IoT / Cat-M(eMTC) / GNSS HAT
Standard Raspberry Pi 40-PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
Onboard USB interface, to test AT commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports ONLY 1.8V SIM card (3V SIM cards are not available)
3x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)