About this product
Description:
The USB TO TTL (D) is a high-performance USB to TTL serial converter featuring the original FT232RNL chip. It allows seamless communication between a computer’s USB port and devices operating at TTL logic levels—such as microcontrollers, sensors, and embedded systems. Ideal for serial debugging, firmware uploading, or data exchange with Raspberry Pi 5 and other platforms. Built-in multi-protection circuits ensure stable, reliable operation across multiple systems and environments.
Specification:
Product category
Industrial USB TO TTL serial cable
Chip scheme
FTDI original FT232RNL
Host port
USB
Data rate
300bps ~ 3Mbps
Device Port
UART
USB port
Connector: USB-A
Protection: self-recovery fuse, ESD protection
UART port
Connector: separated 4pin female header + SH1.0 3PIN fool-proof connector
Protection: IO protection diode
Indicator
PWR: power indicator, turns on when there is USB connection and voltage is detected
TXD: TX indicator, turns on while the USB port is sending data
RXD: RX indicator, turns on while the device port is sending data back
Cable
Black, PVC sheath, total length 1m
Product Interface:
Features:
Adopts original FT232RNL chip, with stable high-speed communication, reliability, and better compatibility.
Built-in self-recovery fuse and ESD for over-current/over-voltage protection, counter-current proof, improving shock resistance.
Onboard IO protection, anti-surge design, with stable communication and safety.
Onboard TTL serial port 3.3V/5V level transilation circuit, for switching TTL communication level.
Onboard 3 x LED indicator, for checking power and signal transmitting status.
Plastic case, sandblasting process, nice-looking and compact.
Pin Description:
VCC: 3.3V or 5V output, configured by switch
GND: Ground
TXD: Connecting to MCU.RXD (signal direction: MCU.RX FT232 PC.TX)
RXD: Connecting to MCU.TXD (signal direction: MCU.TX FT232 PC.RX)
Interface Descriprion:
Pinout
Function
Input/Output
VCC-Red
Provide 5V/3.3V for external devices (configurable via switch)
-
GND-Black
Ground
-
TXD-Green
UART data sending pin, connecting to MCU.RX
Output
RXD-Blue
UART data receiving pin, connecting to MCU.TX
Input
SH1.0-Yellow
UART data receiving pin, connecting to MCU.TX
Output
SH1.0-White
Ground
-
SH1.0-Orange
UART data sending pin, connecting to MCU.RX
Input
Useful Link:
Waveshare Industrial USB to TTL (D) Serial Cable
Package Included:
1 x USB TO TTL (D)
Adopts original FT232RNL chip, with stable high-speed communication, reliability, and better compatibility.
Built-in self-recovery fuse and ESD for over-current/over-voltage protection, counter-current proof, improving shock resistance.
Onboard IO protection, anti-surge design, with stable communication and safety.
Onboard TTL serial port 3.3V/5V level transilation circuit, for switching TTL communication level.
Onboard 3 x LED indicator, for checking power and signal transmitting status.
Plastic case, sandblasting process, nice-looking and compact.