About this product
Description:
CH343G is a USB bus adapter chip that can convert USB to a high-speed asynchronous serial port, supports automatic identification and dynamic self-adaptation of communication baud rates of 115200bps and below, and provides commonly-used MODEM control signals to expand asynchronous serial ports for computers. It can upgrade a common serial device or MCU directly to a USB bus.
Specifications:
Product Type: USB to 485
USB:-
Operating voltage: 5V
Connector: USB-A
Protection: 200mA self-recovery fuse, ESD protection
Transmission Distance: About 5m
RS485:-
Connector: Screw terminal
Pins: A+, B-, GND
Direction Control: Hardware Automatic Control
Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor)
Transmission Distance: About 1.2km(low rate)
Transmission mode: Point-to-multipoint (up to 32 nodes; it is recommended to use repeaters for 16 nodes or more)
LED Indicators:-
PWR: Red power indicator, lights up when there is a USB connection and voltage is detected
TXD: Red TX indicator, light up when the USB port sends data
RXD: Red RX indicator, lights up when the device port sends data back
Operating Environment:-
Temperature: -15℃ ~ 70℃
Humidity: ~5% RH ~ 95% RH
Communication Rate: ~ 3 bps ~ 3 Mbps
Operating System: Mac OS, Linux, Windows 11 / 10 / 8.1 / 8 / 7, Android
Features:
USB TO RS485 Converter supports USB-to-RS485 bidirectional conversion
Fast communication, stable and reliable, better compatibility
USB TO RS485 Converter has onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
USB TO RS485 Converter has an onboard resettable fuse and protection diodes to ensure stable current/voltage stable outputs, provide over-current/over-voltage protection, and improve shockproof performance
USB TO RS485 Converter has 3 LEDs for indicating the power and transceiver status
Pin Description:
Front:-
Back:-
Working Status Indicator:
Onboard 3 LEDs for indicating the power and transceiver status
1. PWR: Lights up red. Power Connected
2. TXT: Blinking Red: Data Transmitting
3. RXD: Blinking Red: Data Receiving
Package Included:
1 x USB TO RS485
1 x USB-A male-to-female cable
1 x Screwdriver
USB TO RS485 Converter supports USB-to-RS485 bidirectional conversion
Fast communication, stable and reliable, better compatibility
USB TO RS485 Converter has onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
USB TO RS485 Converter has an onboard resettable fuse and protection diodes to ensure stable current/voltage stable outputs, provide over-current/over-voltage protection, and improve shockproof performance
USB TO RS485 Converter has 3 LEDs for indicating the power and transceiver status