About this product
Description:
The Industrial-Grade 4G DTU with SIM7600E-H Module is a high-performance communication device built on the Qualcomm 4G platform. Supporting multi-mode and multi-band connectivity, it is compatible with multiple countries and regions, ensuring versatile deployment. Thanks to secondary firmware development, the DTU enables seamless bidirectional transparent data transmission between RS232, RS485, or TTL serial ports and the 4G LTE network with minimal configuration.
Equipped with four operational modes—TCP/UDP, Modbus, HTTP, and MQTT—as well as RNDIS dial-up and GNSS positioning, this DTU combines reliability, stability, and ease of use. It is ideal for industrial data collection, remote control, IoT applications, and other scenarios requiring high-throughput, low-latency 4G data communication. Its robust design ensures consistent performance even in demanding environments.
Specification:
Frequency band
4G
LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
LTE-TDD: B34, B38, B39, B40, B41
3G
UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
2G
GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
GNSS
GPS, Beidou, GLONASS, GALILEO, QZSS
Applicable regions
Global support
Data rate
4G (LTE Cat-4)
150Mbps(DL) / 50Mbps(UL)
3G (HSPA+)
42Mbps(DL) / 5.76Mbps(UL)
2G (EDGE)
236.8Kbps(DL) / 236.8Kbps(UL)
2G (GPRS)
85.6Kbps(DL) / 85.6Kbps(UL)
Software features
Communication protocol
TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS
(controlled via AT commands, with module Open Linux SDK for secondary development)
OS support
Windows/Linux, etc.
Hardware description
Serial port
RS232:
connector: DB9 female
protection: TVS protection, anti-surge, ESD protection
RS485:
connector: screw terminals (A, B)
protection: 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R balancing resistor solder pads)
TTL(UART):
operating voltage: 3.3V or 5V
connector: screw terminals (TXD, RXD, GND)
Serial port baudrate
supports 300bps ~ 921600bps, 115200bps by default
USB port
operating voltage: 5V
connector: Micro USB
protection: ESD protection diode
usage: parameter configuration, dial-up, firmware upgrade
Power input
connector: 7~36V screw terminals or DC 12V jack
protection: Schottky diode protection, reverse-proof
Hardware protection
embedded MCU, hardware watchdog to prevent system crash, industrial-grade aluminum alloy case
Operating voltage
7 ~ 36V DC
Operating current
idle: 10~30mA @12V
transmit: 80~450mA @12V (depending on the network condition)
Indicator
PWR (power supply), RXD/TXD (UART RX/TX), NET (network), LINK (user-defined)
Button
reset button
SIM card
standard SIM card (1.8V / 3V)
Antenna connector
MAIN LTE, AUX LTE, GNSS
Operating temperature
-40℃ ~ 80℃
Features:
4G DTU development kit specially designed for industrial applications, which can be directly embedded for use or secondary development.
Based on the SIM7600G-H communication module, it supports 4G/3G/2G networks in global frequency bands.
Support GPS, Beidou, GLONASS, GALILEO, QZSS, and LBS base station positioning.
Supports USB to 4G and UART/RS232/RS485 to 4G networking communication.
Supports power supply in a wide voltage range of 7 ~ 36 V, which is convenient for power supply on industrial occasions.
Onboard STM8 microcontroller, can be used as a hardware watchdog, automatically powers off and restarts when the DTU works abnormally.
Various on-board protection circuits, anti-static, anti-surge, etc., the communication is stable and safe.
Support baud rate range: 300bps ~ 4Mbps (default is 115200bps).
Support AT command control (based on 3GPP TS 27.007, 27.005, and V.25TER command set).
Aluminum case, oxidized dull polish surface, CNC numerical control opening processing, rugged, elegant.
Product Interface:
Pin Description:
PWR: lights up red when powered on
TXD: blinking blue when transmitting data
RXD: blinking blue when receiving data
NET: blinking green when network connection is established
LINK: a user-defined LED
RESET: reset button
Useful Link:
Waveshare Industrial SIM7600G-H 4G DTU: Global LTE Modem with USB
Package Included:
1 x SIM7600G-H 4G DTU main unit
1 x High-gain LTE MAIN antenna (~ 3m)
1 x High-gain LTE AUX antenna
1 x GPS antenna
1 x Serial cable male to female (~ 1.5m)
1 x USB-A to micro-B cable (~ 1.2m)
1 x OPTIONS 12V 1.0A power adapter
4G DTU development kit specially designed for industrial applications, which can be directly embedded for use or secondary development.
Based on the SIM7600G-H communication module, it supports 4G/3G/2G networks in global frequency bands.
Support GPS, Beidou, GLONASS, GALILEO, QZSS, and LBS base station positioning.
Supports USB to 4G and UART/RS232/RS485 to 4G networking communication.
Supports power supply in a wide voltage range of 7 ~ 36 V, which is convenient for power supply on industrial occasions.
Onboard STM8 microcontroller, can be used as a hardware watchdog, automatically powers off and restarts when the DTU works abnormally.
Various on-board protection circuits, anti-static, anti-surge, etc., the communication is stable and safe.
Support baud rate range: 300bps ~ 4Mbps (default is 115200bps).
Support AT command control (based on 3GPP TS 27.007, 27.005, and V.25TER command set).
Aluminum case, oxidized dull polish surface, CNC numerical control opening processing, rugged, elegant.