About this product
Description:
The Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi is a compact, low-power communication module designed to expand your Pi's connectivity. This all-in-one HAT supports GSM, GPRS, GNSS (GPS), and Bluetooth, enabling your Raspberry Pi to make voice calls, send and receive SMS, access the internet via GPRS, track global positioning using GNSS, and exchange data over Bluetooth. Perfect for IoT projects, GPS tracking, remote communication, and mobile data applications, this HAT ensures seamless integration with your Raspberry Pi and simplifies complex wireless communication in one neat package.
Specification:
Item Type: HAT
Compatibility: Pi Series
HAT Type: GPRS HAT, GSM HAT
Operating Temperature: -40°C to 85°C
Cable Length: 3M
Features:
General:
Standard Raspberry Pi 40-pin GPIO extension header, supports Raspberry Pi series boards
Supports SMS, phone calls, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Support GPS, COMPASS, Glonass, LBS base station positioning, and Omni-positioning
Bluetooth 3.0 supports data transferring through Bluetooth
Onboard USB TO UART Converter CP2102 for UART debugging
6x LEDs for indicating the module's working status
SIM card slot for 1.8V/3V SIM card
RTC with backup battery holder
Baudrate auto-detection (1200bps ~115200bps)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: GSM 11.14 Release 99
GSM/GPRS:
Band: GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz, Quad-band auto search, Compliant with GSM phase 2/2+
Emitting power: Class 4 (2W @ GSM 850/EGSM 900 MHz), Class 1 (1W @ DCS 1800/PCS 1900 MHz)
GPRS connectivity, GPRS multi-slot class 12 (default), GPRS multi-slot class 1~12 (configurable)
GPRS data feature
Downlink speed: max 85.6kbps
Uplink speed: max 85.6kbps
Coding schemes: CS-1CS-2CS-3CS-4
Supports PAP (Password Authentication Protocol) for PPP connection
Supports PBCCH
Supports USSD
SMS
Supports: MT/MO/CB/Text/PDU mode
SMS storage: SIM card
Audio
Voice encode/decode mode: Half RateFull RateEnhanced Full RateAdaptive Multi-Rate
Supports echo cancellation
Supports noise reduction
GNSS:
Receiver type
33 tracking channels
99 acquisition channels
GPS L1C/A code
Sensitivity
Tracking: -165 dBm
Cold starts: -148 dBm
Time-To-First-Fix
Cold starts: 28s (Typ.)
Hot starts: 1s
Warm starts: 26s
Accuracy
Horizontal position: 2.5m CEP
Bluetooth:
Integrates AT commands
Compliant with Bluetooth specification 3.0 + EDR
Supports SPP, OPP, HFP/HSP, etc.
Pin Description:
SIM868 module
ZMM5V1:regulator diode
SMF05C: TVS diode
CP2102:USB TO UART converter
MP1482:power chip
NDC7002N: voltage level translator
GPS status indicator
NET indicator:
Flashes fast when the module starts up
flashes slowly after the GSM register succeeds
STA module working status indicator
SIM868 UART Tx/Rx indicator
Power indicator
SIM868 control button: press the button and hold for 1s, to start up/shut down the SIM868
Raspberry Pi GPIO connector
SIM card slot
USB TO UART interface
3.5mm earphone/mic jack
GNSS antenna connector
Bluetooth antenna connector
GSM antenna connector
CR1220 battery holder: for RTC backup battery
UART selection switch
A: Control the SIM868 through USB TO UART
B: Control the SIM868 through Raspberry Pi
C: Access Raspberry Pi through USB TO UART
Useful Link:
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
Package Included:
1 x GSM/GPRS/GNSS HAT
1 x GSM Antenna
1 x GPS External Antenna (B)
1 x Bluetooth Antenna
1 x USB Type A plug to micro plug cable
2 x RPi screws pack