About this product
Description:
FT232 USB UART Board is a UART module that converts the USB interface to the TTL level. This module enables data communication by connecting the USB interface of a computer or other device to TTL logic-level devices such as microcontrollers, sensors, etc.
Specifications:
Model: USB to UART TTL
Power Supply: 5V
Baudrate: 300bps ~ 3Mbps
UART: 5V/3.3V
OS Support: Support Win7/8/8.1/10/11, Mac, Linux, Android, WinCE
Features :
Original FT232RL onboard
Supports Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
3x VCCIO power mode via jumper setting:
VCCIO - 5V: 5V output
VCCIO - 3.3V: 3.3V output
open the jumper: powered from the target board (3.3V-5V)
3x LED indicators: TXD, RXD, PWR
Pins accessible on pin headers: TXD, RXD, RTS#, CTS#
Other pins are accessible on drilled holes, and easily connected to the user application system (the pin pitch is compatible with the universal prototype board)
Hardware Connection :
VCCIO ↔ 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
GND ↔ GND
TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
Pin Description:
Pin
Function
Input/Output
VCCIO
5V or 3.3V available for external devices (via jumper cap)
-
GND
Ground
-
TXD
Serial data transmit pin, connect to MCU.RX
Output
RXD
Serial data receive a pin, connect to MCU.TX
Input
RTS#
Request to send, connected to MCU.CTS
Output
CTS#
Clear to send, connected to MCU.RTS.
Input
RI#
Ringing indication, used to detect whether the external device is ringing, low active
Input
DCD#
Data carrier detection, low active
Input
DTR#
Data terminal is ready for controlling external devices, low active
Output
DSR#
Dataset is ready for detecting whether the external device is ready, low active
Input
RESET#
FT232 reset pin, low active (pull low the RESET pin, FT232 reset)
Input
CBUS0-CBUS4
I/O pin
Output/Input
Useful Link:
Waveshare FT232 USB UART Board
Package Included :
1 x FT232 USB UART Board (Type C)
1 x 6-Pin Custom Connector Jumper Wire
2 x 5-Pin Male Pinheader & 5-Pin Female Pinheader
Original FT232RL onboard
Supports Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
3x VCCIO power mode via jumper setting:
VCCIO - 5V: 5V output
VCCIO - 3.3V: 3.3V output
open the jumper: powered from the target board (3.3V-5V)
3x LED indicators: TXD, RXD, PWR
Pins accessible on pin headers: TXD, RXD, RTS#, CTS#
Other pins are accessible on drilled holes, and easily connected to the user application system (the pin pitch is compatible with the universal prototype board)