About this product
Description:
The Waveshare ESP32-S3 Touch LCD 5 is a powerful and cost-effective development board built for advanced embedded and IoT applications. Powered by a high-performance ESP32-S3 microcontroller, it supports 2.4GHz Wi-Fi and Bluetooth Low Energy 5, ensuring stable wireless connectivity for modern smart projects.
This board comes integrated with large-capacity Flash and PSRAM, providing smooth performance for complex applications and graphical interfaces. It features a 5-inch capacitive touch LCD display, delivering a responsive and interactive user experience, making it ideal for GUI development with frameworks like LVGL.
Designed for flexibility and rapid prototyping, it includes multiple industrial-grade interfaces such as CAN, I2C, and RS485, enabling seamless integration with sensors, modules, and external devices. This makes it highly suitable for Human-Machine Interface (HMI) systems and real-time control applications.
With its optimized power efficiency and rich feature set, the ESP32-S3 Touch LCD 5 is perfect for IoT solutions, smart home systems, portable devices, automation projects, and embedded control interfaces. It is an excellent choice for developers, engineers, and makers looking to build professional-grade smart systems quickly and efficiently.
Specification:
Basic Parameters
Processor
High-performance Xtensa 32-bit LX7 dual-core processor, up to 240 MHz
Wi-Fi/Bluetooth
Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), onboard antenna
Embedded Memory
512KB SRAM and 384KB ROM
Flash
16MB Flash
PSRAM
8MB PSRAM
Power Supply Range
Type-C 5V / DC 7-36V
Screen Parameters
Resolution
1024 × 600
Display Colors
65K colors
Display Interface
RGB
Display Panel
IPS
Viewing Angle
160°
Brightness
550 Cd/m²
Touch Type
Capacitive
Touch Panel
Tempered Glass
Touch Features
Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support
Peripheral Interfaces
Communication Interfaces
CAN, RS485, I2C, USB
Digital Input
5~36V, bidirectional optocoupler isolation, supports dry contact and wet contact (NPN or PNP) switch inputs
Digital Output
5~36V, optocoupler isolation, output uses a high-current transistor, sink current up to 450mA
USB
Integrated full-speed USB
Others
Power Consumption
5V 450mA
Operating Temperature
0℃ ~ 65℃
Product Interface:
Features:
Powered by a high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz
Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna
Built-in 512KB SRAM and 384KB ROM, stacked with 16MB Flash and 8MB PSRAM
Onboard 5-inch wide capacitive touch screen, 1024 × 600 resolution, 65K colors
Supports I2C interface control for capacitive touch, with 5-point touch, and supports interrupts
Onboard CAN, RS485, I2C interfaces, TF card slot, and integrated full-speed USB
Supports precise control features like flexible clocking and independent module power supply settings, enabling low-power modes for multiple scenarios
Pin Description:
ESP32-S3-WROOM-1-N16R8: Wi-Fi/Bluetooth SoC module, 240 MHz operating frequency, Stacked 8MB PSRAM and 16MB Flash
TF Card Slot: For connecting TF cards
USB Type-C Port: For power supply and program flashing
BOOT Button: Press and hold while powering on for program flashing
RESET Button: Press to reset the ESP32-S3.
Optocoupler Isolation: Isolates and protects I/O pins on the board
5-inch Screen Touch Connector: Connects the touch screen FPC
5-inch Screen Connector: Connects the LCD display's FPC
CAN and RS485 Termination Resistor Switches: Balance resistor switches for the bus, disabled by default
Battery Connection Switch:
ON: Connect battery
OFF: Disconnect battery
3.7V Single-Cell Lithium Battery 1.25 Interface: MX1.25 interface, compatible with all 3.7V lithium batteries
Status Indicators:
DONE: Lithium battery charging completed indicator
CHG: Lithium battery charging indicator
PWR: Power supply indicator
(the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF)
7-36V DC power supply terminal
I2C interface terminal: VOUT pin output 5V/3.3V (switching by onboard resistor)
CAN interface terminal
RS485 interface terminal
Digital output: 5~36V, open-drain output, output load: 450 mA per channel (MAX)
Input signal common terminal:
NC: dry contact passive input
Connect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DC
Connect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DC
Digital input: 5~36V, supports passive / active input (NPN or PNP)
I2C VOUT output selection: for switching output valtage and I/O level of I2C VOUT, 3.3V by default
RTC battery holder: Compatible with CR927 battery
CS8501: Lithium battery recharge manager
PCF85063: RTC chip for providing accurate time control
AP3032KTR-G1: Display backlight boost converter
CH422G: IO expansion chip
SP3485: RS485 transceiver
TJA1051T/3/1J: CAN transceiver
SGM2212-3.3: 800mA low-noise LDO
Application Scenarios:
Useful Link:
Waveshare ESP32-S3 5" Touch LCD-5B Development Board
Waveshare ESP32-S3 5" No-Touch LCD-5B Development Board
Package Included:
1 x Waveshare ESP32-S3 5" Touch LCD-5B Development Board
Powered by a high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz
Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna
Built-in 512KB SRAM and 384KB ROM, stacked with 16MB Flash and 8MB PSRAM
Onboard 5-inch wide capacitive touch screen, 1024 × 600 resolution, 65K colors
Supports I2C interface control for capacitive touch, with 5-point touch, and supports interrupts
Onboard CAN, RS485, I2C interfaces, TF card slot, and integrated full-speed USB
Supports precise control features like flexible clocking and independent module power supply settings, enabling low-power modes for multiple scenarios