About this product
Description:
The Waveshare BMP390 High Precision Barometric Pressure Sensor is a compact and highly accurate sensor module designed for precise measurement of barometric pressure, altitude, and temperature. Powered by Bosch’s advanced BMP390 chip, this sensor delivers exceptional performance with ultra-low noise and high resolution—measuring pressure with up to 0.01 hPa, altitude with 0.1-meter precision, and temperature with 0.01°C accuracy.
Ideal for weather monitoring, environmental sensing, drone altitude control, GPS enhancement, and IoT-based applications, the BMP390 sensor is known for its stability, reliability, and low power consumption. Its compact form factor and versatile I2C/SPI interface make it easy to integrate with platforms like Arduino, Raspberry Pi, ESP32, and other microcontrollers.
Whether you're developing an altimeter, building a weather station, or creating high-precision IoT devices, the Waveshare BMP390 sensor is a perfect fit for applications requiring accurate environmental data.
Specification:
Operating voltage: 5V/3.3V
Communication interface: I2C/SPI
Average operating current: 3.2μA (1Hz)
Barometric detection range: 300~1250hPa
Barometric pressure absolute accuracy: ±0.50hPa (P=300 ...1100 hPa T=0 ... 65 °C)
Barometric pressure relative accuracy: ±0.03hPa (P=700…1100 hPa T=25…40°C)
Temperature coefficient offset: ±0.6Pa/K (25°…40°C at 900 hPa)
Temperature absolute accuracy: ±1.5℃ (0…65℃)
Resolution support: 0.016Pa (In high precision mode)
Possible sampling rates: 200Hz
Operating temperature: -40~85℃
Dimensions: 32mm × 20mm
Via-hole diameter: 2.0mm
Features:
Onboard BMP390 sensor for measuring barometric pressure, altitude and temperature
Supports I2C communication, I2C address configurable, with I2C bus cascading support
Supports SPI communication, enabled via CS pin (I2C bus by default)
Onboard voltage translator, compatible with 3.3V/5V level
Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)
Pin Description:
PIN
I2C
PIN
SPI
VCC
3.3V/5V power supply
VCC
3.3V/5V power supply
GND
Ground
GND
Ground
SDA
I2C data
SDO
SPI data can be connected to host MISO
SCL
I2C clock
SDI
SPI data can be connected to host MOSI
INT
Interrupt output can be connected to I/O
SCK
SPI clock input
CS
Chip selection can be connected to I/O
Useful Link:
Waveshare BMP390 Barometric Pressure Sensor Module
Package Included:
1 x BMP390 Barometric Pressure Sensor
1 x PH2.0 5PIN cable
Onboard BMP390 sensor for measuring barometric pressure, altitude and temperature
Supports I2C communication, I2C address configurable, with I2C bus cascading support
Supports SPI communication, enabled via CS pin (I2C bus by default)
Onboard voltage translator, compatible with 3.3V/5V level
Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)