About this product
Description:
This is a 2.7inch E-Ink Display HAT for Raspberry Pi, 264x176 resolution, with an embedded controller, communicating via the SPI interface. Due to advantages like ultra-low power consumption, wide viewing angle, and clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.
Specifications:
Operating Voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline Dimension: 85mm x 56mm
Display Size: 57.288mm x 38.192mm
Dot Pitch: 0.217 x 0.217
Resolution: 264 x 176
Display Color: Black, White
Grey Level: 2
Full Refresh Time: 15s
Refresh Power: 26.4mW(typ.)
Standby Power: <0.017mW
Viewing Angle: >170°
Features:
No backlight keeps displaying the latest content for a long time even when powered down
2.7inch E-Ink Display HAT has ultra-low power consumption power is only required for refreshing
Onboard 4x Keys for extended applications
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
E-Ink Display HAT has an SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
2.7inch E-Ink Display HAT comes with development resources and manual(examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Pin Description:
VCC: Power (3.3V/5V input)
GND: Ground
DIN: SPI MOSI pin
CLK: SPI SCK pin
CS: SPI chip selection, low active
DC: Data/Command selection (high for data, low for command)
RST: External reset, low active
TFT: Busy status output pin
Useful Link:
Waveshare 2.7inch E-Ink Display HAT
Package Included:
1 x Waveshare 2.7inch E-Paper HAT
1 x Interfacing Cable
No backlight keeps displaying the latest content for a long time even when powered down
2.7inch E-Ink Display HAT has ultra-low power consumption power is only required for refreshing
Onboard 4x Keys for extended applications
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
E-Ink Display HAT has an SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
2.7inch E-Ink Display HAT comes with development resources and manual(examples for Raspberry Pi/Jetson Nano/Arduino/STM32)