About this product
Description:
SC09 Servo is a mini and compact dual-shaft serial bus servo, which can control within a range of 300° and can be programmed to switch to a continuous rotation motor. There is an interface on the servo, which can be used in series to control 253 bus servos at the same time and each servo can get its current angle, load, voltage, mode, and other information. It is suitable for the robotic arm, hexapod robot, humanoid robot, wheeled robot, and other robotic projects that require feedback on servo angle and load.
Specifications:
PRODUCT TYPE
SC09 serial bus servo
TORQUE
2.3 kg.cm @ 6 V
ROTATION ANGLE
300° (0~1024)
Rated torque
0.7 kg cm @ 6 V
NO-LOAD CURRENT
150mA@6V
LOCKED-ROTOR CURRENT
1.0A
NO-LOAD SPEED
0.1 sec/60° (100 RPM) @ 6 V@ 6 V
OPERATING VOLTAGE
4.8~8.4V
POSITION SENSOR RESOLUTION
0.293° (300°/1024)
MECHANISM LIMITED ANGLE
No Limit
GEAR
High-precision metal gear
Motor Type
Iron core motor
Bearing type
sliding bearing
Output shaft
20T/OD3.95mm
Encoder TYPE
Carbon film potentiometer
Control signal
Digital signal
Protocol type
Half-duplex asynchronous serial communication
Baud rate
38400bps ~ 1Mbps
ID RANGE
0 ~ 253
center position
150° (511)
Storage temperature
-30℃~80℃
Operating temperature
-15℃~70℃
Dimensions
23.2×12.0×25.5mm
Servo cable length
15cm
FEEDBACK
Position, Load, Speed, Input Voltage
Features:
Can be used in series to control up to 253 servos simultaneously (assuming adequate power supply) and obtain feedback from each servo.
Wide voltage input: 4.8-8.4V.
Locked-rotor torque up to 2.3 kg·cm @ 6 V.
High precision, angle control accuracy up to 300°/1024.
Programmable operating mode: servo mode angle control/motor mode with continuous rotation
Useful Link:
Waveshare 2.3kg Dual-Axis Serial Bus Servo
Package Includes:
1 x Waveshare SC09 Servo 2.3kg Dual-Axis Serial Bus Servo with 300° Rotation
Can be used in series to control up to 253 servos simultaneously (assuming adequate power supply) and obtain feedback from each servo.
Wide voltage input: 4.8-8.4V.
Locked-rotor torque up to 2.3 kg·cm @ 6 V.
High precision, angle control accuracy up to 300°/1024.
Programmable operating mode: servo mode angle control/motor mode with continuous rotation