About this product
Description:
This 2.13-inch E-Ink display HAT for Raspberry Pi (250x122 resolution) offers a stunning black and white color display. Its ultra-low power consumption and ability to retain content without power make it ideal for always-on applications. Communicate easily via SPI interface with Raspberry Pi, Arduino, Nucleo, and more. Enjoy wide viewing angles and excellent visibility, even in direct sunlight.
Specifications:
Operating Voltage: 3.3V/5V
Interface: SPI
Resolution: 250 x 122
Display Colour: black, white
Grey Level: 2
Full Refresh Time: 2s
Refresh Power: 26.4mW(typ.)
Standby Power: <0.017mW
Viewing Angle: >170°
Dot Pitch: 0.194 x 0.194
Outline Dimension: 65mm x 30.2mm
Display Size: 23.71mm x 48.55mm
Features:
No backlight, keeps displaying the last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Pin Description:
VCC
3.3V/5V
GND
Ground
DIN
SPI MOSI pin
CLK
SPI SCK pin
CS
SPI chip selection, low active
DC
Data / Command selection (high for data, low for command)
RST
External reset, low active
BUSY
Busy status output (high for busy)
Useful Link:
Waveshare 2.13-inch E-Paper HAT
Package Included:
1 x Waveshare 2.13inch E-Paper HAT
No backlight, keeps displaying the last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)