About this product
Description:
This is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supporting CAN FD (CAN with Flexible Data-Rate); the speed is higher than the traditional 1Mbps of CAN2.0, features multiple onboard protection circuits, high anti-interference capability, and stable operation. It is suitable for fields such as automotive devices or industrial automation.
Specifications:
CAN controller: MCP2518FD
Control bus: SPI
Screw terminal input voltage: DC 8~28V
Operating voltage: 5V
Logic level: 3.3V/5V
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
Supports both traditional CAN2.0 and CAN FD protocols
Breakout SPI control pins for connecting with host control boards like STM32/Arduino
Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
Onboard lightningproof, ESD protection, short-circuit protection, and safer communication
Onboard voltage translator: select 3.3V/5V operating voltage by jumper
Onboard 120Ω terminal resistor, configured by jumper
Comes with development resources and manual (examples for Raspberry Pi/Arduino)
Interface:
CAN interface
PIN Raspberry Pi (BCM2835) Raspberry Pi (WPI) Description
5V 5V 5V 5V Power input
GND GND GND Ground
MISO_0 9 (MISO) 13 (MISO) SPI_0 Data output
MOSI_0 10 (MOSI) 12 (MOSI) SPI_0 Data input
SCK_0 11 (SCK) 14 (SCK) SPI_0 Clock input
CS_0 8 (CE0) 10 (CE0) CAN_0 Chip select
INT_0 25 6 CAN_0 Interrupt Pin
MISO_1 9/19 (MISO) 13/24 (MISO) SPI_1 Data output
MOSI_1 10/20 (MOSI) 12/28 (MOSI) SPI_1 Data input
SCK_1 11/21 (SCLK) 14/29 (SCLK) SPI_1 Clock input
CS_1 7(CE1)/26 11(CE1)/25 CAN_1 Chip select
INT_1 16 27 CAN_1 Interrupt Pin
Product Interface:
MCP2518FD controller
Transceiver chip
SI8642ED digital isolator
MP1584EN power chip
RT9193-33 power chip
B0505LS-1W power supply isolation module
Standard Raspberry Pi 40PIN GPIO header
CAN bus screw terminal
External power supply terminal
8~26V DC input
MCU control pins
For use with host boards like Arduino
120Ω terminal resistor switch
3.3V/5V logic level switch
CAN operating mode selection
A: CAN_0 and CAN_1 use two separate SPIs (default)
B: CAN_0 and CAN_1 share a single SPI
Power indicator
Freewheeling diode
SM24CANB TVS diode array
2A fast resettable fuse
Useful Links:
Wiki
Package Included:
1 x 2-CH CAN FD HAT
2 × 20-pin female headers
1 x Standoffs pack (2 pcs)
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
Supports both traditional CAN2.0 and CAN FD protocols
Breakout SPI control pins for connecting with host control boards like STM32/Arduino
Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
Onboard lightningproof, ESD protection, short-circuit protection, and safer communication
Onboard voltage translator: select 3.3V/5V operating voltage by jumper
Onboard 120Ω terminal resistor, configured by jumper
Comes with development resources and manual (examples for Raspberry Pi/Arduino)