About this product
Driver: ST7735S
Interface: SPI
Display color: RGB, 65K color
Resolution: 128x160
Backlight: LED
Operating voltage: 3.3V/5V
Description :
This is a general LCD display Module, 1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface.
Features
SPI interface, requires minimum GPIO for controlling
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Driver: ST7735S
Interface: SPI
Display color: RGB, 65K color
Resolution: 128x160
Backlight: LED
Operating voltage: 3.3V/5V
Interface
SYMBOL
DESCRIPTION
VCC
Power (3.3V/5V input)
GND
Ground
DIN
SPI data input
CLK
SPI clock input
CS
Chip selection, low active
DC
Data/Command selection (high for data, low for command)
RST
Reset, low active
BL
Backlight
Package Included :
1.8inch LCD Module x1
PH2.0 20cm 8Pin x1
SPI interface, requires minimum GPIO for controlling
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)