About this product
Operating voltage: 2.6~5.5V
Resolution: 160×80 pixels
Communication interface: 4-wire SPI
Display size: 21.70 × 10.80mm
Display panel: IPS
Pixel size: 0.1356 × 0.135mm
Driver: ST7735S
Dimension : 52.00 × 25.00mm
Description :
0.96inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 160×80 Pixels, SPI Interface
Specifications
Operating voltage: 2.6~5.5V
Resolution: 160×80 pixels
Communication interface: 4-wire SPI
Display size: 21.70 × 10.80mm
Display panel: IPS
Pixel size: 0.1356 × 0.135mm
Driver: ST7735S
Dimension : 52.00 × 25.00mm
Hardware connection :
Please take care of the direction when you connect Pico, an USB port is printed to indicate . You can also check the pin of Pico and the LCD board when connecting.
You can connect display according to the table.
e-Paper--Pico--Description
VCC---VSYS---Power Input
GND---GND---GND
DIN---GP11---MOSI pin of SPI, data transmitted from Master t Slave
CLK---GP10---SCK pin of SPI, clock pin
CS---GP9---Chip selection of SPI, low active
DC---GP8---Data/Command control pin (High:data; Low: command)
RST---GP12---Reset pin, low active
BL---GP13---Backlight control
Package Content :
1 x Pico-LCD-0.96