Volcano-Style Brass Nozzle 0.60mm for 1.75mm Filament - RS3067

SKU RS3067

0.60mm brass Volcano-style nozzle for 1.75mm filament RS3067 is a long-format brass extrusion nozzle intended for a compatible Volcano-style 3D-printer hotend.

₹58.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

0.60mm brass Volcano-style nozzle for 1.75mm filament RS3067 is a long-format brass extrusion nozzle intended for a compatible Volcano-style 3D-printer hotend. This listing is the 0.60mm outlet version for 1.75mm filament. The two figures describe different things: 1.75mm is the filament feed size, while 0.60mm is the nozzle opening. Product selection

Material: brass alloy.

Filament diameter: 1.75mm.

Nozzle outlet: 0.60mm.

Format: extended Volcano-style nozzle.

Quantity supplied: one nozzle.

This is a generic compatible spare, not a claim of original E3D manufacture. Check your existing nozzle and heater-block specification before ordering. Long Volcano-style nozzles and short standard V6 nozzles are not direct substitutes simply because both descriptions mention V6. Thread fit alone does not establish compatibility: overall length, threaded length, tip position and the heatbreak sealing arrangement must also match. Printing use and material choice A 0.60mm outlet can be useful for larger extrusion lines and practical parts where very fine detail is less important. The longer Volcano-style heated section is associated with higher-flow hotends, but changing the nozzle alone does not guarantee a particular speed or flow increase. The heater, extruder, filament and slicer settings still limit performance. Brass is commonly used for routine printing with unfilled filaments such as PLA, PETG and ABS, within the complete printer's temperature and material limits. Abrasive filled filaments can wear a brass outlet. Choose an appropriate wear-resistant nozzle when the filament maker requires one, and inspect worn or damaged nozzles if extrusion quality changes. Installation and slicer checks Follow the hotend manufacturer's installation, heating and tightening procedure. Support the heater block correctly and avoid twisting heater or thermistor wires. Do not use a universal tightening torque or temperature copied from an unrelated hotend. Hot metal and softened plastic can cause burns. After fitting, set the slicer's nozzle diameter to 0.60mm, choose suitable line width and layer height, then tune temperature and flow with a small test print. Recheck first-layer clearance after changing the nozzle and inspect the hotend for leaks. Stop printing if molten plastic escapes around the block or sealing joint. Includes one brass Volcano-style nozzle, 1.75mm filament / 0.60mm outlet. Printer, heater block, tools and filament are not included. SKU: RS3067.

More in Filament

You might also need