About this product
Description:
This TTL ↔ RS485 Adapter Module is a reliable single-chip serial level converter. It enables microcontrollers or devices using TTL serial (3.3 V or 5 V) to communicate over long distances using the RS-485 differential standard. Indicator LEDs for RXD and TXD provide live visual feedback of serial activity.
Specifications:
Logic level support
3.3 V / 5 V TTL input/output
Communication mode
Half-duplex serial (TTL ↔ RS-485)
Differential bus lines
A (non-inverting), B (inverting)
Transceiver IC
MAX485 or equivalent
Operating voltage
Typically 5 V, module supports 3.3/5 V logic
Termination resistor
120 Ω option (via solder pad or jumper)
LED indicators
RXD, TXD for serial activity
Data rate
Up to ~2.5 Mbps under ideal conditions
Max bus distance
Typically up to 1200 meters in suitable wiring conditions
Operating temperature
~ –40 °C to +85 °C
Board dimensions
Varies by module model (e.g. ~44 × 14 mm for MAX485 module)
Features:
Compatible with 3.3 V and 5 V TTL logic levels (can operate under both)
Uses onboard MAX485 (or equivalent low-power slew-rate transceiver)
Screw terminal block or terminal pads for RS-485 A / B differential lines
120 Ω termination resistor option (sometimes onboard or via solder pad)
RXD / TXD LEDs for visual serial activity indication
Supports half-duplex serial communication (one direction at a time)
Operating temperature range often −40 °C to +85 °C (typical for MAX485 modules)
Applications / Use Cases:
Long-distance UART communication (especially in noisy environments)
Industrial sensor networks, Modbus RTU, RS-485 bus systems
Microcontroller projects requiring robust serial links
Automation, robotics, building control systems
Usage Notes:
Tie DE and RE pins appropriately (often connected together) to switch between transmit & receive modes
Use twisted pair cables for RS-485 A/B lines to minimize interference
Use termination resistor (120 Ω) at ends of RS-485 bus if distance is large
Ensure a common ground reference (GND) between TTL and RS-485 sides
Power module with stable 3.3 V or 5 V supply
Package Included:
1 x TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
1 x Connection Cable
Compatible with 3.3 V and 5 V TTL logic levels (can operate under both)
Uses onboard MAX485 (or equivalent low-power slew-rate transceiver)
Screw terminal block or terminal pads for RS-485 A / B differential lines
120 Ω termination resistor option (sometimes onboard or via solder pad)
RXD / TXD LEDs for visual serial activity indication
Supports half-duplex serial communication (one direction at a time)
Operating temperature range often −40 °C to +85 °C (typical for MAX485 modules)