TTL FTDI Transmitter USB Module TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer - RS3775

SKU RS3775

By using this TTL FTDI Transmitter USB Module, you can easily install your project or product into a USB interface.

₹238.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

By using this TTL FTDI Transmitter USB Module, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other.

TTL FTDI Transmitter USB Module is a device that has a TTL port that provides the computer with a USB port. By connecting this TTL FTDI Transmitter USB Module to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, and Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.

TTL FTDI Transmitter USB Module based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices.

This TTL FTDI Transmitter USB Module decreases the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the board’s power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V

Specifications:

IC Chip: FT232RL

Connector Type: Mini USB

Features:

Automatic detection of data transfer speeds up to 1Mbps

Data exchange capability with an external interface with UART protocol

Output Voltage 5v and 3.3vIndicator LEDs USB Connector

TTL FTDI Transmitter USB Module with RX and TX Indicator LEDs

Manage System for Reducing Flow In Idle and Standby Mode

Support for serial output devices such as modems, card reader devices, digital cameras and more.

Interface: Mini USB

+3.3V and +5.0V signal Level Support using SMD jumper.

Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0

DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads

Package Included:

1 x TTL FTDI Transmitter USB Module TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer

Automatic detection of data transfer speeds up to 1Mbps

Data exchange capability with an external interface with UART protocol

Output Voltage 5v and 3.3vIndicator LEDs USB Connector

TTL FTDI Transmitter USB Module with RX and TX Indicator LEDs

Manage System for Reducing Flow In Idle and Standby Mode

Support for serial output devices such as modems, card reader devices, digital cameras and more.

Interface: Mini USB

+3.3V and +5.0V signal Level Support using SMD jumper.

Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0

DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads

Specifications

IC ChipFT232RL
Connector TypeMini USB

More in Sensor Modules

You might also need