About this product
Material : rubber
Color: Black
Makes a powerful robot with this
Suitable for all terrain robotic toys and applications.
Description:
A Track belt is a loop of flexible material used to mechanically link two or more rotating shafts, most often parallel. Belts may be used as a source of motion, to transmit power efficiently, or to track relative movement. Belts are looped over pulleys. In a two pulley system, the belt can either drive the pulleys in the same direction, or the belt may be crossed, so that the direction of the shafts is opposite.
Application:
Making a robo tank.
Rover robot.
DIY projects requiring track belted propulsion.
How to use:
Measure the required track belt.
Cut it with the help of cutter or scissor.
Join the two ends with the help of permanent tire fixtures.
Caution:
Belt slips because it extends while in motion
The extension in the belt is a function of friction between belt and ground, load on the bot, the tension in the belt(how tight it is), difference in tension at the slack side and tight side.
Every belt can handle only a limited tension depending on its stiffness
No matter how tight you make it, how rough the pulleys are, it would slip off due to its limited stiffness.
Either reduces the load on the bot which in turn would reduce the tension in the belt or use a stiffer belt.
See if you can get belt of greater thickness and width hence you would find a stiffer belt.
Package Included:
1 x Track Belt For Arduino/Raspberry-Pi/Robotics