About this product
Description:
If you want to Detect any Obstacle but don’t know how to do it So, To overcome this problem, the only thing you should do is get a TFmini Lidar Range Finder. Lidar is commonly used to make high-resolution maps, with applications in surveying, geodesy, geomatics, archaeology, geography, geology, geomorphology, seismology, forestry, atmospheric physics, laser guidance, airborne laser swath mapping (ALSM), and laser altimetry.
Specifications:
Operating Range: 0.3-12m
The maximum operating range at 10% reflectivity: 5m
Applicable Voltage Range: 4.5-6V
Average Power Consumption: 0.12W
Acceptance Angle: 2.3°
Communication Interface: UART
Electromagnetic Compatibility(EMC): EN 55032 Class B
Baud Rate:115200
Data Bit: 8
Stop Bit: 1
Parity Bit: 0
Minimum Resolution Ratio: 5mm
Frequency: 100Hz
Wavelength: 850nm
Operating Temperature: 20-60℃
Light Sensitivity: 70,000lux
Accuracy: 1% (less than 6m), 2% (6m-12m)
Features:
TFmini Lidar Range Finder is lightweight about 6 grams, compact with reduced dimensions of 42mm x 15mm x 16mm
The operating range is 0.3-12 m. The average current is 120 ma, and the instantaneous current can reach up to 800 ma. When TFmini Lidar Range Finder detects beyond the limits of its interval, it can adapt.
Package Included:
1 x TFmini Lidar Range Finder Sensor Module Single-Point TFmini Micro Ranging Module Lidar Detectors for Raspberry Pi Pixhawk
TFmini Lidar Range Finder is lightweight about 6 grams, compact with reduced dimensions of 42mm x 15mm x 16mm
The operating range is 0.3-12 m. The average current is 120 ma, and the instantaneous current can reach up to 800 ma. When TFmini Lidar Range Finder detects beyond the limits of its interval, it can adapt.