Testing NRF24LO1 Transreciever module interfacing with Arduino Uno or Arduino Leonardo - KT870

SKU KT870

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16

₹2400.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Arduino uno with usb cable- 1

Arduino Leonardo with USB cable- 1

NRF24lo1 - 2

Jumper wires MALE TO FEMALE – 40 piece

9v battery - 2

Battery snapper with DC jack - 2

HARDWARE REQUIRED

Arduino uno with usb cable- 1

Arduino Leonardo - 1

NRF24lo1 - 2

Jumper wires MALE TO FEMALE – 40 piece

Arduino cable - 1

9v battery - 2

Battery snapper with DC jack - 2

NRF24L01 Module with ARDUINO LEONARDO

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

PIN DESCRIPTION

Arduino Leonardo

Microcontroller: ATmega32u4

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 6-20V

Digital I/O Pins: 20

PWM Channels: 7

Analog Input Channels: 12

DC Current per I/O Pin: 40 mA

DC Current for 3.3V Pin: 50 mA

Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader

SRAM: 2.5 KB (ATmega32u4)

EEPROM: 1 KB (ATmega32u4)

Clock Speed: 16 MHz

NRF24L01 Module

Voltage: 3-3.6V (recommended 3.3V) V

Maximum output power: +20dBm

Emission mode current(peak): 115mA

Receive Mode Current(peak): 45mA

Power-down mode current: 4.2uA

SOFTWARE REQUIRED

Arduino IDE ( programmable software for Arduino boards )

You can download the software from this link : https://www.arduino.cc/en/Main/Software

LIBRARY REQUIRED To download the SPI library

Sketch --> Include Library --> SPI

IF it is pre downloaded otherwise click on manage libraries to download the libraries

PIN DIAGRAM

NRF24L01 Module

CIRCUIT DESCRIPTION

CODE

Before uploading code select the appropriate board , here you choose Leonardo board . https://docs.google.com/document/d/e/2PACX-1vTbym3uXOMrbsmyogQB0VTjwYdh4h-kCE-9OqsNz-cmXz8rgounsqkPpuo9XC9vHXMQU-Nc82zWHwWT/pub

NRF24L01 Module with ARDUINO UNO

SPECIFICATION

Microcontroller- ATmega328

Operating Voltage- 5V

Input Voltage (recommended) - 7to12V

Input Voltage(limit) - 6to20V

Digital I/O Pins-14 (of which 6 provide PWM output)

Analog Input Pins-6

DC Current per I/O Pin-40 mA

DC Current for 3.3V Pin-50 mA

Flash Memory-32 KB (ATmega328) of which 0.5 KB used by boot loader

SRAM-2 KB (ATmega328)

EEPROM-1 KB (ATmega328)

Clock Speed-16 MHz

CIRCUIT DESCRIPTION

CODE

Before uploading code select the appropriate board , here you choose UNO board . https://docs.google.com/document/d/e/2PACX-1vTnfTiFIb5eCBi5kSvSY21DN0O1U3vO9SdKDhymWpRNQ0-hVj9_6Xnnn30ICdaUdtVfCA87IAirfsbS/pub

WORKING

The nrf24lo1 is a trans receiver module. In this one nrf24lo1 is transmitting and other one is receiving the data. We see the Data transmission in the serial monitor.

Specifications

Microcontroller- ATmega328
Operating Voltage- 5V
Input Voltage (recommended) - 7to12V
Input Voltage(limit) - 6to20V
Digital I/O Pins-14 (of which 6 provide PWM output)
Analog Input Pins-6
DC Current per I/O Pin-40 mA
DC Current for 3.3V Pin-50 mA
Flash Memory-32 KB (ATmega328) of which 0.5 KB used by boot loader
SRAM-2 KB (ATmega328)
EEPROM-1 KB (ATmega328)
Clock Speed-16 MHz

More in Arduino Boards

You might also need