About this product
Amplifier Chip: TDA7498
Output Power: 100W+100W (Vcc = 36 V, RL = 6Ω, THD: 10%)
Output Power: 80W+80W (Vcc = 34 V, RL = 8Ω, THD: 10%)
Wide Range Single Power Supply: 15~34VDC(recommended 24V)
Description:
The TDA7498 is a 100W 100W dual-BTL class-D audio amplifier with single power supply designed for home theater and active speaker applications. It adopts 36-pin Power SSO packaging with exposed pad up (EPU), more convenient to mount a separate heatsink.
Specification:
Amplifier Chip: TDA7498
Output Power: 100W+100W (Vcc = 36 V, RL = 6Ω, THD: 10%)
Output Power: 80W+80W (Vcc = 34 V, RL = 8Ω, THD: 10%)
Wide Range Single Power Supply: 15~34VDC(recommended 24V)
Applicable Speaker Impedance: 8 ohm best(4 ohm or 6 ohm also works)
Four fixed gain settings available: 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
Features:
Adopts differential input to minimize common-mode noise
Protection: short-circuit protection, over temperature protection
With standby and mute features
Mode:
The TDA7498 has three kinds of modes: standby, mute and normal working mode(you can set the mode by shorting the pins shown on pictures).
Standby mode: all circuits closed, at a low power state;
Mute mode: all input signals connects ground, the duty cycle of forward/backward PWM output signal is 50%;
Normal working mode: the amplifier works normally.
Note:
Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Please allow 1-3CM differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Package Included:
1 x TDA7498 2X100W Dual Channel Class D Audio Amplifier Board/DC 24V Digital Stereo Power Amp Module for 8O Subwoofer
Adopts differential input to minimize common-mode noise
Protection: short-circuit protection, over temperature protection
With standby and mute features