SUNLU

SUNLU TPU 95A Flexible 3D Printer Filament 1.75mm 1kg Spool - Burgundy

SKU IR0000110

SUNLU TPU 95A Flexible 3D Printer Filament - Burgundy, 1.75mm, 1kg SUNLU TPU 95A is a flexible 3D printer filament with a Shore hardness of 95A - soft enough to bend, stretch and

₹2413.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU TPU 95A Flexible 3D Printer Filament - Burgundy, 1.75mm, 1kg

SUNLU TPU 95A is a flexible 3D printer filament with a Shore hardness of 95A - soft enough to bend, stretch and absorb impacts, stiff enough to print as easily as PLA on almost any 1.75mm FDM printer. This 1kg spool of burgundy TPU is the go-to material in Indian homes, workshops and engineering labs for parts that need to flex rather than snap: phone covers, gaskets, wheels, bumpers, drone mounts and vibration-damping feet.

Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures.

Key Features

Flexible and tough: Shore 95A hardness with over 900% elongation at break - parts bend, stretch and spring back without tearing.

Impact and abrasion resistant: absorbs shocks and resists wear, chemicals, grease and UV for long-lasting functional parts.

Easy to print for a flex: prints on direct-drive and Bowden printers with standard settings - no enclosure needed.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency keeps extrusion smooth and layers even.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin long prints.

Wide compatibility: works with 99% of 1.75mm FDM printers - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more.

Technical Specifications

Colour Burgundy

Material TPU 95A (thermoplastic polyurethane, Shore 95A)

Diameter 1.75mm (± 0.02mm tolerance)

Net weight 1kg spool

Shore hardness 95A

Tensile strength 31 ± 3 MPa

Elongation at break > 900%

Density 1.21 g/cm³

Nozzle temperature 190-210°C (50-80mm/s), 210-230°C (80-120mm/s)

Bed temperature 50-60°C

Recommended retraction 0.8-1.2mm

What is it good for?

Phone and tablet cases, gaskets and seals, RC and drone parts, wheels and tyres, bumpers and edge protectors, cable organisers, vibration-damping mounts, tool grips and any part that must flex, absorb impact or resist wear.

In the box

1 x TPU 95A filament spool, Burgundy, 1.75mm, 1kg net weight

Good to know

Print slower than PLA (50-80mm/s) and keep retraction low for clean results. A direct-drive extruder makes TPU easiest, but Bowden setups work with slower speeds.

TPU absorbs moisture faster than PLA. For the best surface quality, dry the spool at 55-65°C for 4 hours before printing, and store it sealed with desiccant.

A PEI sheet or glue stick helps both adhesion and easy release of flexible parts.

Flexible and tough: Shore 95A hardness with over 900% elongation at break - parts bend, stretch and spring back without tearing.

Impact and abrasion resistant: absorbs shocks and resists wear, chemicals, grease and UV for long-lasting functional parts.

Easy to print for a flex: prints on direct-drive and Bowden printers with standard settings - no enclosure needed.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency keeps extrusion smooth and layers even.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin long prints.

Wide compatibility: works with 99% of 1.75mm FDM printers - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more.

Specifications

Colour
Burgundy
Material
TPU 95A (thermoplastic polyurethane, Shore 95A)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Shore hardness
95A
Tensile strength
31 ± 3 MPa
Elongation at break
> 900%
Density
1.21 g/cm³
Nozzle temperature
190-210°C (50-80mm/s), 210-230°C (80-120mm/s)
Bed temperature
50-60°C
Recommended retraction
0.8-1.2mm

More in Filament

You might also need