About this product
SUNLU Silk PLA+ 3D Printer Filament - Red Yellow Blue, 1.75mm, 1kg
SUNLU Silk PLA+ Tri Color packs three glossy shades (red yellow blue) into one co-extruded 1.75mm filament. The surface of the finished part changes colour as you turn it, giving a shimmering, almost metallic colour-shift effect straight off the print bed - no painting, no post-processing.
Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle and warping resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.
Key Features
Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.
100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.
Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.
Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.
Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.
Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.
Technical Specifications
Material
Silk PLA+ (glossy silk-effect PLA)
Colour
Red Yellow Blue (Tri Color)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
205-215°C (50-100mm/s), 215-235°C (100-200mm/s)
Bed temperature
50-60°C
Print speed
50-100mm/s standard, up to 200mm/s with higher temperature
Spool dimensions
8.00" diameter, 2.50" width, 2.20" hub hole
What is it good for?
Statement vases, sculptures and busts, fantasy figurines, festive decorations and gifts. The red yellow blue triple-tone shift gives even simple geometry a painted, iridescent look that stands out on a shelf.
In the box
1 x SUNLU Silk PLA+ filament spool, Red Yellow Blue, 1.75mm, 1kg net weight
Good to know
The balance of the three colours depends on part size and orientation - preview in your slicer and rotate the model to tune where each shade lands.
Silk PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.
Store sealed with desiccant when not in use.
Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.
100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.
Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.
Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.
Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.
Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.