SUNLU

SUNLU Silk PLA+ Tri Color 3D Printer Filament 1.75mm 1kg Spool - Blue Green Purple

SKU IR0000093

The surface of the finished part changes colour as you turn it, giving a shimmering, almost metallic colour-shift effect straight off the print bed - no painting, no

₹1779.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU Silk PLA+ 3D Printer Filament - Blue Green Purple, 1.75mm, 1kg

SUNLU Silk PLA+ Tri Color packs three glossy shades (blue green purple) into one co-extruded 1.75mm filament. The surface of the finished part changes colour as you turn it, giving a shimmering, almost metallic colour-shift effect straight off the print bed - no painting, no post-processing.

Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle and warping resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.

Key Features

Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Technical Specifications

Material Silk PLA+ (glossy silk-effect PLA)

Colour Blue Green Purple (Tri Color)

Diameter 1.75mm (± 0.02mm tolerance)

Net weight 1kg spool

Nozzle temperature 205-215°C (50-100mm/s), 215-235°C (100-200mm/s)

Bed temperature 50-60°C

Print speed 50-100mm/s standard, up to 200mm/s with higher temperature

Spool dimensions 8.00" diameter, 2.50" width, 2.20" hub hole

What is it good for?

Statement vases, sculptures and busts, fantasy figurines, festive decorations and gifts. The blue green purple triple-tone shift gives even simple geometry a painted, iridescent look that stands out on a shelf.

In the box

1 x SUNLU Silk PLA+ filament spool, Blue Green Purple, 1.75mm, 1kg net weight

Good to know

The balance of the three colours depends on part size and orientation - preview in your slicer and rotate the model to tune where each shade lands.

Silk PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.

Store sealed with desiccant when not in use.

Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Specifications

Material
Silk PLA+ (glossy silk-effect PLA)
Colour
Blue Green Purple (Tri Color)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
205-215°C (50-100mm/s), 215-235°C (100-200mm/s)
Bed temperature
50-60°C
Print speed
50-100mm/s standard, up to 200mm/s with higher temperature
Spool dimensions
8.00" diameter, 2.50" width, 2.20" hub hole

More in Filament

You might also need