SUNLU

SUNLU Silk PLA+ Four Color 3D Printer Filament 1.75mm 1kg Spool - Gold Purple Red Blue

SKU IR0000104

SUNLU Silk PLA+ Four Color weaves four glossy shades (gold purple red blue) into a single 1.75mm filament, producing a vivid multi-colour finish that shifts as you move around the

₹1779.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU Silk PLA+ 3D Printer Filament - Gold Purple Red Blue, 1.75mm, 1kg

SUNLU Silk PLA+ Four Color weaves four glossy shades (gold purple red blue) into a single 1.75mm filament, producing a vivid multi-colour finish that shifts as you move around the printed part. It is the easiest way to get eye-catching multi-colour prints from a single-spool, single-nozzle printer - no AMS, no painting.

Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle and warping resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.

Key Features

Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Technical Specifications

Material Silk PLA+ (glossy silk-effect PLA)

Colour Gold Purple Red Blue (Four Color)

Diameter 1.75mm (± 0.02mm tolerance)

Net weight 1kg spool

Nozzle temperature 205-215°C (50-100mm/s), 215-235°C (100-200mm/s)

Bed temperature 50-60°C

Print speed 50-100mm/s standard, up to 200mm/s with higher temperature

Spool dimensions 8.00" diameter, 2.50" width, 2.20" hub hole

What is it good for?

Show-piece vases, character models, festive decor, gifts and market-stall prints. The gold purple red blue blend gives a rich multicolour shimmer that reads differently from every angle.

In the box

1 x SUNLU Silk PLA+ filament spool, Gold Purple Red Blue, 1.75mm, 1kg net weight

Good to know

The colour you see at any point depends on the spool position and part geometry - expect a lively mix rather than sharp colour bands.

Silk PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.

Store sealed with desiccant when not in use.

Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Specifications

Material
Silk PLA+ (glossy silk-effect PLA)
Colour
Gold Purple Red Blue (Four Color)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
205-215°C (50-100mm/s), 215-235°C (100-200mm/s)
Bed temperature
50-60°C
Print speed
50-100mm/s standard, up to 200mm/s with higher temperature
Spool dimensions
8.00" diameter, 2.50" width, 2.20" hub hole

More in Filament

You might also need