About this product
SUNLU Silk PLA+ 3D Printer Filament - Black Green, 1.75mm, 1kg
SUNLU Silk PLA+ Dual Color is a genuine two-colour silk filament: two glossy shades (black green) are co-extruded along the full length of the spool, so the colour you see shifts with the viewing angle of the part. Rotate a finished print and it flips between the two tones - a striking effect for vases, figurines and art pieces, with no painting required.
Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle and warping resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.
Key Features
Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.
100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.
Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.
Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.
Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.
Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.
Technical Specifications
Material
Silk PLA+ (glossy silk-effect PLA)
Colour
Black Green (Dual Color)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
205-215°C (50-100mm/s), 215-235°C (100-200mm/s)
Bed temperature
50-60°C
Print speed
50-100mm/s standard, up to 200mm/s with higher temperature
Spool dimensions
8.00" diameter, 2.50" width, 2.20" hub hole
What is it good for?
Vases and decorative pots, dragons and figurines, Christmas and festive decor, phone stands, name plates and gifts. The black green two-tone shift makes simple models look complex and painted - a big visual upgrade for zero extra print time.
In the box
1 x SUNLU Silk PLA+ filament spool, Black Green, 1.75mm, 1kg net weight
Good to know
The exact split between the two colours depends on part size, orientation and layer height - rotate the model in your slicer to place each shade where you want it.
Silk PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.
Store sealed with desiccant when not in use.
Silky glossy finish: smooth, shiny surface straight off the bed - no polishing or painting needed.
100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.
Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.
Easy to print: prints like regular PLA - low warping, great layer adhesion, no enclosure needed.
Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.
Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.