SUNLU

SUNLU PLA+ 3D Printer Filament 1.75mm 1kg Spool - Transparent Purple

SKU IR0000069

SUNLU PLA+ (PLA Plus) is the toughened everyday PLA that made SUNLU a favourite with print farms and hobbyists: it prints as easily as regular PLA but comes out noticeably

₹1194.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU PLA+ 3D Printer Filament - Transparent Purple, 1.75mm, 1kg

SUNLU PLA+ (PLA Plus) is the toughened everyday PLA that made SUNLU a favourite with print farms and hobbyists: it prints as easily as regular PLA but comes out noticeably stronger, with impact strength up to 8 kJ/m² - roughly 2-3 times that of ordinary PLA on the market. This 1kg spool of translucent purple 1.75mm filament is a dependable daily-driver material for homes, schools, studios and workshops across India.

Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle, warping and stringing resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.

Key Features

2-3x tougher than ordinary PLA: impact strength up to 8 kJ/m² for parts that survive daily use.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Technical Specifications

Material PLA+ / PLA Plus (toughened PLA)

Colour Transparent Purple

Diameter 1.75mm (± 0.02mm tolerance)

Net weight 1kg spool

Nozzle temperature 195-205°C (50-100mm/s), 205-220°C (100-300mm/s)

Print speed 50-100mm/s standard, up to 300mm/s with higher temperature

Impact strength up to 8 kJ/m² (2-3x ordinary PLA)

Spool dimensions 8.00" diameter, 2.50" width, 2.20" hub hole

What is it good for?

Prototypes, figurines and miniatures, cosplay props, drone and RC parts, robotics brackets, planters, household repairs, school projects and decorative models. The translucent purple finish gives prints a clean, solid colour straight off the bed.

In the box

1 x SUNLU PLA+ filament spool, Transparent Purple, 1.75mm, 1kg net weight

Good to know

PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.

Store sealed with desiccant when not in use.

For faster printing above 100mm/s, raise the nozzle temperature into the 205-220°C range.

2-3x tougher than ordinary PLA: impact strength up to 8 kJ/m² for parts that survive daily use.

100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.

Easy to print: low warping, great layer adhesion, no enclosure needed.

Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.

Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.

Specifications

Material
PLA+ / PLA Plus (toughened PLA)
Colour
Transparent Purple
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
195-205°C (50-100mm/s), 205-220°C (100-300mm/s)
Print speed
50-100mm/s standard, up to 300mm/s with higher temperature
Impact strength
up to 8 kJ/m² (2-3x ordinary PLA)
Spool dimensions
8.00" diameter, 2.50" width, 2.20" hub hole

More in Filament

You might also need