SUNLU

SUNLU PLA+ 2.0 3D Printer Filament 1.75mm 1kg Spool - Coffee Brown

SKU IR0000006

SUNLU PLA+ 2.0 is the upgraded version of SUNLU's popular PLA+ filament, made for prints that need to survive real use.

₹1651.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU PLA+ 2.0 3D Printer Filament - Coffee Brown, 1.75mm, 1kg

SUNLU PLA+ 2.0 is the upgraded version of SUNLU's popular PLA+ filament, made for prints that need to survive real use. It delivers roughly 2-3 times the impact resistance of standard PLA, so functional parts, brackets, enclosures and mechanical components come out tougher and less brittle. This 1kg spool of rich coffee brown 1.75mm filament is a reliable everyday material for hobbyists, schools, print farms and engineering workshops across India.

The filament is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, which keeps extrusion flow stable and avoids under-extrusion or layer shifts on long prints. SUNLU's fully automated winding process lays the filament neatly on the spool, preventing knots and tangles that cause mid-print failures. It runs on 99% of FDM printers on the market - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning needed.

Key Features

2-3x tougher than standard PLA: improved impact resistance for load-bearing and functional parts.

Neat, tangle-free winding: automated spooling reduces nozzle clogging and ruined prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for smooth, even extrusion.

Works with 99% of FDM printers: prints like regular PLA, no enclosure required.

Reusable 3rd-generation spool: multi-hole design for thorough drying, spool can be reused with refills.

Low shrinkage (0.1-0.3%): good dimensional accuracy and low warping.

Technical Specifications

Material PLA+ 2.0 (toughened PLA)

Colour Coffee Brown

Diameter 1.75mm (± 0.02mm tolerance)

Net weight 1kg spool

Nozzle temperature 205-215°C (50-100mm/s), 215-245°C (100-200mm/s)

Bed temperature 50-60°C

Tensile strength 46 ± 5 MPa

Flexural strength 83 ± 5 MPa

Notched Izod impact strength 10 ± 3 kJ/m²

Elongation at break 10 ± 2.5%

Density 1.21 g/cm³

Melt flow index 8.3 ± 2 g/10 min

Shrinkage 0.1-0.3%

Heat deflection temperature 56 ± 3°C

Recommended retraction 0.8-1.2mm at 30-40mm/s

What is it good for?

Functional prototypes, drone and RC parts, robotics brackets, jigs and fixtures, cosplay props, toys, planters, household repairs and any print that might get dropped, flexed or stressed. For visible decorative models it leaves a clean, smooth, slightly satin coffee brown finish.

In the box

1 x SUNLU PLA+ 2.0 filament spool, Coffee Brown, 1.75mm, 1kg net weight

Good to know

PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.

Store sealed with desiccant when not in use.

Printing above 200mm/s is possible on high-speed printers; raise nozzle temperature accordingly.

2-3x tougher than standard PLA: improved impact resistance for load-bearing and functional parts.

Neat, tangle-free winding: automated spooling reduces nozzle clogging and ruined prints.

Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for smooth, even extrusion.

Works with 99% of FDM printers: prints like regular PLA, no enclosure required.

Reusable 3rd-generation spool: multi-hole design for thorough drying, spool can be reused with refills.

Low shrinkage (0.1-0.3%): good dimensional accuracy and low warping.

Specifications

Material
PLA+ 2.0 (toughened PLA)
Colour
Coffee Brown
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
205-215°C (50-100mm/s), 215-245°C (100-200mm/s)
Bed temperature
50-60°C
Tensile strength
46 ± 5 MPa
Flexural strength
83 ± 5 MPa
Notched Izod impact strength
10 ± 3 kJ/m²
Elongation at break
10 ± 2.5%
Density
1.21 g/cm³
Melt flow index
8.3 ± 2 g/10 min
Shrinkage
0.1-0.3%
Heat deflection temperature
56 ± 3°C
Recommended retraction
0.8-1.2mm at 30-40mm/s

More in Filament

You might also need