About this product
SUNLU PETG Glow in the Dark 3D Printer Filament - Glow Blue, 1.75mm, 1kg
SUNLU PETG Glow in the Dark in Glow Blue combines the everyday strength of PETG with a luminous effect: prints absorb light during the day and glow for about 10 minutes once the lights go out. The filament contains 10% luminous powder, giving a glow effect close to glow PLA while keeping PETG's toughness and weather resistance. This 1kg spool of 1.75mm filament suits hobbyists, schools, event decorators and print farms across India.
Charging is easy three ways: 2-3 minutes under UV light, 3-5 minutes in sunlight, or 10-20 minutes under fluorescent light to reach saturation. The filament is held to a tight 1.75 ± 0.02 mm diameter tolerance with laser-monitored production, and SUNLU's neat automated winding prevents knots and tangles. It runs on 99% of FDM printers on the market - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more.
Key Features
Excellent glow-in-the-dark effect: contains 10% luminous powder - charge it with light and prints glow for about 10 minutes in the dark.
Three ways to charge: UV light 2-3 minutes, sunlight 3-5 minutes, or fluorescent light 10-20 minutes to saturation.
Real PETG strength: the toughness, layer adhesion and weather resistance of SUNLU PETG, plus the glow effect.
Less stringing, no clogging: engineered for smooth, consistent extrusion without nozzle blocks.
Precise 1.75 ± 0.02 mm diameter: stable feeding and compatibility with 99% of FDM printers.
Perfect for decorations: nameplates, signs, logos, jewellery, party and festival decor that comes alive at night.
Technical Specifications
Material
PETG
Colour
Glow Blue
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
230-240°C (50-100mm/s), 240-260°C (100-300mm/s)
Bed temperature
70-80°C
Tensile strength
48 ± 10 MPa
Flexural strength
70 ± 10 MPa
Notched Izod impact strength
3 ± 1 kJ/m²
Elongation at break
11 ± 5%
Density
1.27 g/cm³
Melt flow index
5.7 ± 3 g/10 min
Shrinkage
0.1-0.5%
Heat deflection temperature
70 ± 5°C
Recommended retraction
0.8-1.2mm at 30-40mm/s
What is it good for?
Holiday and party decorations, night-time signage, nameplates, logos, jewellery, emergency markers, kids' room decor, toys and any print that should be visible in the dark. Because the base material is PETG, these parts also survive outdoor use and everyday knocks.
In the box
1 x SUNLU PETG Glow in the Dark filament spool, Glow Blue, 1.75mm, 1kg net weight
Good to know
Glow powder is abrasive - a hardened steel nozzle is recommended for long-term use.
PETG absorbs moisture; dry at 60-65°C for 4-6 hours if you hear popping or see stringing.
Brighter and longer charging light gives a stronger glow; UV charges fastest.
Excellent glow-in-the-dark effect: contains 10% luminous powder - charge it with light and prints glow for about 10 minutes in the dark.
Three ways to charge: UV light 2-3 minutes, sunlight 3-5 minutes, or fluorescent light 10-20 minutes to saturation.
Real PETG strength: the toughness, layer adhesion and weather resistance of SUNLU PETG, plus the glow effect.
Less stringing, no clogging: engineered for smooth, consistent extrusion without nozzle blocks.
Precise 1.75 ± 0.02 mm diameter: stable feeding and compatibility with 99% of FDM printers.
Perfect for decorations: nameplates, signs, logos, jewellery, party and festival decor that comes alive at night.