About this product
SUNLU PETG-CF Carbon Fibre 3D Printer Filament - Black, 1.75mm, 1kg
SUNLU PETG-CF10 is a carbon fibre reinforced PETG filament infused with 10% chopped carbon fibre, built for parts that need real strength and stiffness. It is made for industrial applications such as drone frames, tools, automotive components and structural parts, while printing almost as easily as regular PETG. This 1kg spool of black 1.75mm filament suits engineering workshops, drone builders, robotics teams and serious hobbyists across India.
The carbon fibre reinforcement raises stiffness and impact strength to 7 ± 2 kJ/m² while cutting the creep and warping seen in plain PETG, so load-bearing parts hold their shape over time. Prints come out with a premium matte finish that hides layer lines and needs no post-processing. Diameter is held to a tight 1.75 ± 0.02 mm tolerance for stable extrusion, and the filament runs on most FDM printers - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more.
Key Features
{CF_FEATURES}
Technical Specifications
Material
PETG + 10% carbon fibre (PETG-CF10)
Colour
Black
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
240-250°C (up to 150mm/s)
Bed temperature
50-70°C
Tensile strength
32 ± 4 MPa
Flexural strength
55.5 ± 5 MPa
Notched Izod impact strength
7 ± 2 kJ/m²
Elongation at break
14 ± 3%
Density
1.23 g/cm³
Melt flow index
5.7 ± 1.5 g/10 min
Heat deflection temperature
71 ± 3°C
Shore hardness
71 HD
Recommended retraction
0.8-1.2mm at 30mm/s
What is it good for?
Drone frames and RC parts, functional prototypes, tooling, jigs and fixtures, automotive under-bonnet components, robotics structures, machine brackets and any part that needs stiffness, impact resistance and a clean matte black finish.
In the box
1 x SUNLU PETG-CF10 carbon fibre filament spool, Black, 1.75mm, 1kg net weight
Good to know
Carbon fibre is abrasive - a hardened steel or ruby nozzle is strongly recommended (a brass nozzle will wear quickly).
Dry at 60-65°C for 4-6 hours if the spool has absorbed moisture.
An enclosure is not required, but keep the print away from drafts for best layer bonding.