About this product
SUNLU PETG 3D Printer Filament - Rainbow, 1.75mm, 1kg
SUNLU PETG Rainbow is a multicolour version of SUNLU's popular PETG filament: the colour transitions along the spool, so models come out with a vivid rainbow gradient without any painting or filament swaps. This 1kg spool of 1.75mm filament keeps the strength and weather resistance PETG is known for, making it a fun and reliable material for hobbyists, schools, print farms and workshops across India.
The filament is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, which keeps extrusion flow stable and avoids under-extrusion on long prints. SUNLU's neat, automated winding lays the filament cleanly on the spool, preventing knots and tangles that cause mid-print failures. It runs on 99% of FDM printers on the market - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning needed.
Key Features
Excellent layer adhesion: reduces warping and keeps layers bonded for smooth, strong prints with great structural integrity.
Enhanced toughness: PETG outperforms PLA in durability, ideal for sturdy parts that see real stress and daily use.
High impact strength: parts endure bumps and drops without cracking, for long-lasting functional performance.
Indoor and outdoor durability: prints maintain their properties over time and resist weathering outdoors.
Less stringing, no clogging: engineered to cut stringiness and avoid nozzle blocks for consistent results.
Precise 1.75 ± 0.02 mm diameter: tight tolerance keeps extrusion stable across long prints, compatible with 99% of FDM printers.
Technical Specifications
Material
PETG
Colour
Rainbow
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool
Nozzle temperature
230-240°C (50-100mm/s), 240-260°C (100-300mm/s)
Bed temperature
60-70°C
Tensile strength
48 ± 10 MPa
Flexural strength
70 ± 10 MPa
Notched Izod impact strength
3 ± 1 kJ/m²
Elongation at break
11 ± 5%
Density
1.27 g/cm³
Melt flow index
5.7 ± 3 g/10 min
Shrinkage
0.1-0.5%
Heat deflection temperature
70 ± 5°C
Recommended retraction
0.8-1.2mm at 30-40mm/s
What is it good for?
Functional prototypes, display models, toys, cosplay props, planters, gifts and any part where a multicolour gradient finish adds character. Because it is real PETG, the prints still handle outdoor use, mechanical stress and everyday knocks. Tip: the colour sequence you get depends on where the spool starts in its cycle, so small models show fewer colours and larger models show the full rainbow.
In the box
1 x SUNLU PETG filament spool, Rainbow, 1.75mm, 1kg net weight
Good to know
PETG absorbs moisture over time. If you hear popping or see extra stringing, dry the spool at 60-65°C for 4-6 hours.
Store sealed with desiccant when not in use.
PETG sticks firmly to the bed - use a glue stick layer or textured sheet to make part removal easy.
Excellent layer adhesion: reduces warping and keeps layers bonded for smooth, strong prints with great structural integrity.
Enhanced toughness: PETG outperforms PLA in durability, ideal for sturdy parts that see real stress and daily use.
High impact strength: parts endure bumps and drops without cracking, for long-lasting functional performance.
Indoor and outdoor durability: prints maintain their properties over time and resist weathering outdoors.
Less stringing, no clogging: engineered to cut stringiness and avoid nozzle blocks for consistent results.
Precise 1.75 ± 0.02 mm diameter: tight tolerance keeps extrusion stable across long prints, compatible with 99% of FDM printers.