SUNLU

SUNLU PA12-CF Carbon Fiber Nylon 3D Printer Filament 1.75mm 1kg Spool - Black

SKU IR0000190

SUNLU PA12-CF is a carbon-fiber-reinforced Nylon-12 filament for projects that call for a rigid, dimensionally stable engineering material.

₹8261.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

SUNLU PA12-CF Black Engineering Filament

SUNLU PA12-CF is a carbon-fiber-reinforced Nylon-12 filament for projects that call for a rigid, dimensionally stable engineering material. This black version is supplied on a 1kg spool with a nominal filament diameter of 1.75mm. It is intended for compatible FDM or FFF printers that can handle the higher processing temperatures and wear-resistant hardware required by filled nylon materials.

The PA12 base absorbs less moisture than PA6 according to SUNLU, while the carbon-fiber reinforcement helps produce stiff functional parts. Possible uses include fixtures, housings, tooling and engineering prototypes. Those uses are starting points for material selection, not a guarantee that a printed part will meet a particular load or safety requirement. Validate the finished design, print orientation and working conditions before putting a part into service.

Prepare Your Printer

SUNLU lists a nozzle temperature range of 260-280°C and a printing speed of 60-100mm/s for this material. A heated bed at 60-70°C with a suitable adhesive is the published starting setup. Check your hotend's rated temperature, build surface and printer manufacturer's material guidance before loading the spool. This is an engineering filament, not a direct substitute for a standard PLA profile.

Carbon-fiber-filled filament can wear softer nozzles. SUNLU recommends a wear-resistant nozzle, such as hardened steel, for PA12-CF. Confirm the nozzle and feed path are suitable for this material, then use a small calibration print to tune extrusion and layer bonding before a long job.

Keep the Filament Dry

Lower moisture absorption does not remove the need for dry storage. SUNLU recommends keeping PA12-CF in a sealed, dry environment below 20% relative humidity. Moisture can affect extrusion and surface quality, so follow the spool's drying instructions and use equipment rated for the required drying temperature. Keep the free end secured during storage and handling to prevent loose turns from forming on the spool.

The gallery shows SUNLU spool photographs and examples of the material's applications. Printed objects shown in those images are not included. The supplied item is one black PA12-CF filament spool. For repeatable results, record the settings that work on your printer and check both the material requirements and the demands of each new part.

Specifications

Brand SUNLU

Material PA12-CF (carbon-fiber-reinforced Nylon-12)

Color Black

Filament diameter 1.75mm

Diameter tolerance ±0.03mm

Net filament weight 1kg

Recommended nozzle temperature 260-280°C

Recommended printing speed 60-100mm/s

Recommended heated bed 60-70°C with suitable adhesive

Nozzle guidance Wear-resistant nozzle, such as hardened steel

Storage guidance Keep sealed and dry; below 20% RH recommended

Package contents 1 x SUNLU PA12-CF Black 1kg spool

Specifications

Brand
SUNLU
Material
PA12-CF (carbon-fiber-reinforced Nylon-12)
Color
Black
Filament diameter
1.75mm
Diameter tolerance
±0.03mm
Net filament weight
1kg
Recommended nozzle temperature
260-280°C
Recommended printing speed
60-100mm/s
Recommended heated bed
60-70°C with suitable adhesive
Nozzle guidance
Wear-resistant nozzle, such as hardened steel
Storage guidance
Keep sealed and dry; below 20% RH recommended
Package contents
1 x SUNLU PA12-CF Black 1kg spool

More in Filament

You might also need