About this product
SUNLU High-Speed PLA+ 3D Printer Filament - Blue, 1.75mm, 1kg
SUNLU High-Speed PLA+ (HS PLA+) is built for modern high-speed printers, running from 50mm/s up to 600mm/s while keeping detail crisp and layers strong. This 1kg spool of blue PLA+ pairs that speed with genuinely better mechanical properties - its impact strength of up to 8KJ/m2 is two to three times higher than ordinary PLA or PLA+, so parts survive drops and daily use.
SUNLU's owned winding technology lays every metre 100% neatly on the spool - a level of spooling other brands don't match - and a tight 1.75 ± 0.02 mm diameter tolerance keeps extrusion smooth and clog-free through the fastest prints.
Key Features
True high-speed PLA+: prints at 50-600mm/s with no plugging, stringing or warping.
2-3x impact strength: up to 8KJ/m2 impact resistance - far tougher than regular PLA or PLA+.
100% neatly wound: SUNLU's automated spooling means no knots or tangles, even at high feed rates.
Precise 1.75 ± 0.02 mm diameter: consistent extrusion and better layer adhesion on long prints.
Brighter, cleaner colours: vivid finish free of bubbles, clogs and warping.
Wide compatibility: suits almost all 1.75mm FDM printers, including high-speed CoreXY machines.
Technical Specifications
Colour
Blue
Material
High-Speed PLA+ (PLA Plus)
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool (approx. 330m)
Nozzle temperature
200-215°C at 50-150mm/s; 215-230°C at 150-300mm/s; 230-260°C at 300-600mm/s
Bed temperature
50-60°C
Impact strength
Up to 8KJ/m2
What is it good for?
Fast prototypes, functional parts, cosplay props, household items and production runs where speed and toughness both matter.
In the box
1 x High-Speed PLA+ filament spool, Blue, 1.75mm, 1kg net weight
Good to know
Match nozzle temperature to speed: hotter for faster printing, within the recommended windows above.
Store sealed with desiccant; dry at 45-55°C for a few hours if the spool has absorbed moisture.
True high-speed PLA+: prints at 50-600mm/s with no plugging, stringing or warping.
2-3x impact strength: up to 8KJ/m2 impact resistance - far tougher than regular PLA or PLA+.
100% neatly wound: SUNLU's automated spooling means no knots or tangles, even at high feed rates.
Precise 1.75 ± 0.02 mm diameter: consistent extrusion and better layer adhesion on long prints.
Brighter, cleaner colours: vivid finish free of bubbles, clogs and warping.
Wide compatibility: suits almost all 1.75mm FDM printers, including high-speed CoreXY machines.