About this product
SUNLU High-Speed Matte PETG 3D Printer Filament - Yellow, 1.75mm, 1kg
SUNLU High-Speed Matte PETG combines the toughness of PETG with a premium low-sheen matte surface and true high-speed printability. Improved melt flow lets it run from 50mm/s right up to 600mm/s, so this 1kg spool of yellow filament turns out strong, professional-looking parts in a fraction of the usual print time.
Every spool is held to a tight 1.75 ± 0.02 mm diameter tolerance for smooth, consistent extrusion, and SUNLU's automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures.
Key Features
High-speed printing: engineered for 50-600mm/s print speeds without giving up surface quality or layer strength.
Matte finish: a soft, low-reflection surface that hides layer lines and gives parts a refined, professional look.
Durable and impact resistant: PETG toughness with excellent resistance to wear, weather and many chemicals - suited to functional and end-use parts.
Excellent layer adhesion: strong interlayer bonding reduces warping and keeps prints structurally sound.
Low stringing, no clogging: formulated for clean extrusion and consistent results on long prints.
Wide compatibility: works with almost all 1.75mm FDM printers, including Creality, Prusa, Anycubic, Bambu Lab and more.
Technical Specifications
Colour
Yellow
Material
High-Speed Matte PETG
Diameter
1.75mm (± 0.02mm tolerance)
Net weight
1kg spool (approx. 330m)
Nozzle temperature
205-215°C at 50-100mm/s; 240-250°C at 100-300mm/s; 260-270°C at 300-600mm/s
Bed temperature
70-80°C heated (or unheated with glue stick)
Print speed
50-600mm/s
What is it good for?
Functional prototypes, mechanical parts, enclosures, brackets, outdoor components and any print that needs PETG durability with a clean matte finish - produced fast.
In the box
1 x High-Speed Matte PETG filament spool, Yellow, 1.75mm, 1kg net weight
Good to know
High-flow PETG absorbs moisture readily, which can cause stringing and oozing. Dry the spool at 65°C for 4-6 hours before printing and store it sealed with desiccant.
Reduce retraction and increase nozzle temperature within the recommended window if you see stringing at higher speeds.
High-speed printing: engineered for 50-600mm/s print speeds without giving up surface quality or layer strength.
Matte finish: a soft, low-reflection surface that hides layer lines and gives parts a refined, professional look.
Durable and impact resistant: PETG toughness with excellent resistance to wear, weather and many chemicals - suited to functional and end-use parts.
Excellent layer adhesion: strong interlayer bonding reduces warping and keeps prints structurally sound.
Low stringing, no clogging: formulated for clean extrusion and consistent results on long prints.
Wide compatibility: works with almost all 1.75mm FDM printers, including Creality, Prusa, Anycubic, Bambu Lab and more.