About this product
SUNLU 14K Standard Resin - Dark Grey, 1kg
This listing supplies one 1kg bottle of SUNLU 14K Standard Resin in Dark Grey. It is a rigid liquid photopolymer for compatible UV resin 3D printers, developed for detailed models with a matte surface finish. Choose this bottle when the material name, color and quantity match your project. It is the 14K Standard formulation, not ordinary Standard Resin, Standard Plus, Red Wax resin or a water-washable version.
Fine Detail and a Matte Surface
SUNLU describes this material as suitable for head sculpts, decorative models and figurines where small shapes and surface texture matter. Its flowing consistency helps resin return under the build between layers. Dark Grey gives unpainted parts a neutral appearance for checking contours before further finishing. The 14K name identifies the resin range; it does not upgrade a printer's screen or guarantee a particular dimensional accuracy on every machine.
Gallery photographs show the Dark Grey bottle alongside material-family features and example prints. Other colors, painted models and equipment may appear to explain possible applications. They are not included. Only the single Dark Grey 1kg bottle is supplied. Cured appearance and detail depend on the model, printer, supports, exposure, cleaning and post-curing.
Set Up for Your Printer
The manufacturer's technical data sheet lists a curing wavelength range of 365-405nm. Check your printer's material requirements rather than choosing resin from screen resolution alone. SUNLU describes compatibility with suitable LCD, DLP and SLA resin systems. This is not filament for an FDM printer and must not be fed into a filament nozzle.
Shake the bottle thoroughly as directed and let bubbles settle before printing. Start with a profile appropriate for 14K Standard Resin and calibrate exposure using a small test print. Temperature, layer height, color and geometry can change the settings needed. SUNLU's technical data are laboratory reference values, not guarantees for a finished part. Do not treat this rigid modeling resin as a substitute for an engineering material without checking the requirements.
Cleaning, Handling and Storage
This formulation uses solvent cleaning, not water washing. Follow the current bottle instructions and technical data sheet for cleaning with suitable ethanol or isopropyl alcohol and for completing UV post-curing. Keep resin-contaminated cleaning liquid and waste contained; do not discharge them into drains.
Uncured resin needs careful handling even when odor is low. The 14K Standard safety data sheet warns of harmful swallowing, skin irritation, allergic skin reactions, severe eye damage, respiratory irritation, possible organ damage after repeated exposure, and long-lasting aquatic toxicity. Use suitable protective gloves, clothing and eye protection, provide good ventilation and avoid breathing vapour or spray. Keep it away from children, food and drink.
Store the original bottle tightly closed and protected from light. SUNLU's technical data sheet recommends 15-35 degrees Celsius and relative humidity below 60%. Read the current safety data sheet before use and follow local disposal requirements.
Specifications
Brand
SUNLU
Material
14K Standard rigid UV photopolymer resin
Color
Dark Grey
Net contents
1kg
Curing wavelength
365-405nm; verify printer compatibility
Typical tensile strength
35 MPa, manufacturer laboratory reference
Typical Shore hardness
84 HD, manufacturer laboratory reference
Typical viscosity
300-600 mPa.s at 25 degrees Celsius
Cleaning
Solvent cleaning; not water-washable
Package contents
1 x 1kg bottle, Dark Grey 14K Standard Resin